Meilleur Microsoft MB6-826 test formation guide

Choisir le Pass4Test peut vous aider à réussir 100% le test Microsoft MB6-826 qui change tout le temps. Pass4Test peut vous offrir les infos plus nouvelles. Dans le site de Pass4Test le servie en ligne est disponible toute la journée. Si vous ne passerez pas le test, votre argent sera tout rendu.

Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.

Vous avez aussi la possibilité à réussir le test Microsoft MB6-826. Pass4Test offre la service de la mise à jour gratuite pendant un an. Si vous échouez le test, votre argent sera tout rendu. Maintenant, vous pouvez télécharger la partie gratuite prendre examinser la qualité des produits de Pass4Test.

Le programme de formation Microsoft MB6-826 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Microsoft MB6-826, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Microsoft MB6-826 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Microsoft MB6-826 sans aucune doute.

Code d'Examen: MB6-826
Nom d'Examen: Microsoft (AX 2009 Product Builder)
Questions et réponses: 50 Q&As

Beaucoup de gens trouvent difficile à passer le test Microsoft MB6-826, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Microsoft MB6-826 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.

Le test Microsoft MB6-826 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.

MB6-826 Démo gratuit à télécharger: http://www.pass4test.fr/MB6-826.html

NO.1 You are a Product Designer in the Contoso Company responsible for creating product models. Among
the customers of the company, the most popular configuration of a home theater item is the one with LCD
television and five speakers. You are asked by the Order Processor to make the "LCD" and "five" values
default for the Television and Speakers variables. You added these variables to the Default values form
and now must fill the Valid for (Customer relation) and Valid for (Item relation) fields for each variable.
What must you select in these two fields for each variable?
A.Table and All
B.All and Table
C.All and All
D.Table and Table WCalibriTahomaZ
Answer: B

Microsoft   MB6-826   MB6-826 examen   MB6-826   certification MB6-826   MB6-826 examen

NO.2 For which of the following options can you set up default values in a product model?
A.all modeling variables
B.all modeling variables and all calculation variables
C.all variable groups
D.only item groups WCalibriTahomaZ
Answer: A

certification Microsoft   MB6-826 examen   MB6-826

NO.3 You are a Product Designer in the Contoso Company responsible for creating a model for a
configurable projector. You want projector options to display on two separate tabs in the Product Builder
configuration form. General projector options must be displayed on the General tab, and options for the
projector lamp - on the Lamp tab. How can you achieve this?
A.Create two variable groups, name them accordingly and then add them to the model.
B.Use the template variable groups and name them General and Lamp when adding them to the model.
C.Open the Product Builder configuration form in the AOT, create and name tabs there.
D.Click Test model and edit the form that opens. WCalibriTahomaZ
Answer: A

Microsoft examen   certification MB6-826   certification MB6-826   certification MB6-826   MB6-826

NO.4 You are a Product Designer in the Contoso Company. You create a product model for a home theater.
The theater has the following options:
Television: CRT, LCD, Plasma
Number of speakers: 2, 3, 5
Speaker height: 30.5, 45.5, 50.5
Which type of variables do you use to make each option available in the Product Builder configuration
form?
A.Enumerated text variable for the first option, Integer for the second, and Real for the third
B.Enumerated text variable for the first option, Real for the second, and Integer for the third
C.Enumerated text variables for the first and third options, and Real for the second
D.Enumerated text variable for the first, second, and third options WCalibriTahomaZ
Answer: D

Microsoft examen   certification MB6-826   MB6-826 examen

NO.5 For what purpose do you create global rules?
A.To use them as templates when creating rules for the model.
B.To make them available for all the users, regardless of user profiles.
C.To be able to attach them to several product models.
D.To be able to automatically apply them to all the models created. WCalibriTahomaZ
Answer: C

Microsoft   MB6-826   MB6-826   MB6-826 examen   MB6-826   MB6-826 examen

NO.6 You are a Product Designer responsible for creating a table constraint. Now it is time to add it to the
product model. How can you accomplish this?
A.Add the table constraint to the model as one of the validation rules.
B.Attach the table constraint to the model from the Table constraints form.
C.Add the table constraint to the Table constraints tab and then add related modeling variables to the
Modeling variables tab.
D.Add the table constraint to the Table constraints tab. Related Table variables are added to the model
automatically. WCalibriTahomaZ
Answer: D

Microsoft   MB6-826   certification MB6-826   MB6-826   MB6-826

NO.7 For which of the following purposes can you use the Description field in the Variable groups form?
A.To have its content displayed as a tab name in the Product Builder configuration form.
B.To have its content displayed as a help text in the Product Builder configuration form.
C.To hold product model designer's comments about the modeling variable.
D.To hold notes to the Production Department about how the item is to be produced. WCalibriTahomaZ
Answer: A

certification Microsoft   MB6-826 examen   MB6-826 examen   MB6-826 examen

NO.8 What are the mandatory steps to take to make the user profiles functional?
Choose the 2 that apply.
A.Attach user profiles to employees.
B.Assign user profiles to variables.
C.Attach user profiles to Microsoft Dynamics AX users.
D.Activate user profiles in the Product Builder parameters form. WCalibriTahomaZ
Answer: AB

Microsoft   MB6-826 examen   MB6-826   MB6-826

NO.9 You are a Product Designer responsible for creating product models. Your task is to create a model for
a home theater. The home theater dimension calculation you plan to implement in the modeling tree is
rather complex and depends on a number of factors. If this calculation fails, you want the user to view an
error message and to abort the configuration. What must you implement to abort the configuration if the
calculation fails?
A.Create an Action rule.
B.Create a Constraint rule.
C.Create a Message node of the error type. It automatically aborts the configuration.
D.It is not necessary to implement anything. In case some calculation fails the configuration is always
aborted and a standard error message is displayed. WCalibriTahomaZ
Answer: C

Microsoft examen   MB6-826 examen   certification MB6-826   MB6-826

NO.10 You are a Product Designer in the Contoso Company. The company opens a new subsidiary in Russia.
The Product Builder configuration forms must be translated to Russian to be used by local employees.
How can you make the Product Builder configuration forms available in Russian?
Choose the 2 that apply.
A.Add Russian to the Available languages in the Product Builder parameters form.
B.Type the translation in the form that opens after clicking Language texts in the Modeling variables form.
C.Type the translation in the Translation table located under Product Builder > Setup.
D.Type the translation in the form that opens after clicking Language texts in the Variable group form.
WCalibriTahomaZ
Answer: BD

Microsoft   MB6-826   MB6-826   MB6-826

Avec la version plus nouvelle de Q&A Microsoft MB6-826, réussir le test Microsoft MB6-826 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.

Dernières Microsoft MB6-826 de la pratique de l'examen questions et réponses téléchargement gratuit

Vous pouvez tout d'abord télécharger le démo Microsoft MB6-826 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.

Avec l'aide du Pass4Test, vous allez passer le test de Certification Microsoft MB6-826 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de Microsoft MB6-826, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.

La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.

Code d'Examen: MB6-826
Nom d'Examen: Microsoft (AX 2009 Product Builder)
Questions et réponses: 50 Q&As

L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification Microsoft MB6-826. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification Microsoft MB6-826.

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Microsoft MB6-826, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

MB6-826 Démo gratuit à télécharger: http://www.pass4test.fr/MB6-826.html

NO.1 You are a Product Designer in the Contoso Company responsible for creating a model for a
configurable projector. You want projector options to display on two separate tabs in the Product Builder
configuration form. General projector options must be displayed on the General tab, and options for the
projector lamp - on the Lamp tab. How can you achieve this?
A.Create two variable groups, name them accordingly and then add them to the model.
B.Use the template variable groups and name them General and Lamp when adding them to the model.
C.Open the Product Builder configuration form in the AOT, create and name tabs there.
D.Click Test model and edit the form that opens. WCalibriTahomaZ
Answer: A

Microsoft   MB6-826   MB6-826   MB6-826

NO.2 For which of the following options can you set up default values in a product model?
A.all modeling variables
B.all modeling variables and all calculation variables
C.all variable groups
D.only item groups WCalibriTahomaZ
Answer: A

certification Microsoft   MB6-826   MB6-826

NO.3 For which of the following purposes can you use the Description field in the Variable groups form?
A.To have its content displayed as a tab name in the Product Builder configuration form.
B.To have its content displayed as a help text in the Product Builder configuration form.
C.To hold product model designer's comments about the modeling variable.
D.To hold notes to the Production Department about how the item is to be produced. WCalibriTahomaZ
Answer: A

certification Microsoft   MB6-826   MB6-826 examen   MB6-826 examen

NO.4 You are a Product Designer responsible for creating product models. Your task is to create a model for
a home theater. The home theater dimension calculation you plan to implement in the modeling tree is
rather complex and depends on a number of factors. If this calculation fails, you want the user to view an
error message and to abort the configuration. What must you implement to abort the configuration if the
calculation fails?
A.Create an Action rule.
B.Create a Constraint rule.
C.Create a Message node of the error type. It automatically aborts the configuration.
D.It is not necessary to implement anything. In case some calculation fails the configuration is always
aborted and a standard error message is displayed. WCalibriTahomaZ
Answer: C

Microsoft   certification MB6-826   MB6-826 examen   certification MB6-826

NO.5 For what purpose do you create global rules?
A.To use them as templates when creating rules for the model.
B.To make them available for all the users, regardless of user profiles.
C.To be able to attach them to several product models.
D.To be able to automatically apply them to all the models created. WCalibriTahomaZ
Answer: C

Microsoft examen   MB6-826   MB6-826   MB6-826 examen

NO.6 You are a Product Designer in the Contoso Company. The company opens a new subsidiary in Russia.
The Product Builder configuration forms must be translated to Russian to be used by local employees.
How can you make the Product Builder configuration forms available in Russian?
Choose the 2 that apply.
A.Add Russian to the Available languages in the Product Builder parameters form.
B.Type the translation in the form that opens after clicking Language texts in the Modeling variables form.
C.Type the translation in the Translation table located under Product Builder > Setup.
D.Type the translation in the form that opens after clicking Language texts in the Variable group form.
WCalibriTahomaZ
Answer: BD

certification Microsoft   MB6-826   MB6-826   MB6-826   MB6-826

NO.7 You are a Product Designer responsible for creating a table constraint. Now it is time to add it to the
product model. How can you accomplish this?
A.Add the table constraint to the model as one of the validation rules.
B.Attach the table constraint to the model from the Table constraints form.
C.Add the table constraint to the Table constraints tab and then add related modeling variables to the
Modeling variables tab.
D.Add the table constraint to the Table constraints tab. Related Table variables are added to the model
automatically. WCalibriTahomaZ
Answer: D

Microsoft   MB6-826   certification MB6-826   MB6-826 examen

NO.8 You are a Product Designer in the Contoso Company responsible for creating product models. Among
the customers of the company, the most popular configuration of a home theater item is the one with LCD
television and five speakers. You are asked by the Order Processor to make the "LCD" and "five" values
default for the Television and Speakers variables. You added these variables to the Default values form
and now must fill the Valid for (Customer relation) and Valid for (Item relation) fields for each variable.
What must you select in these two fields for each variable?
A.Table and All
B.All and Table
C.All and All
D.Table and Table WCalibriTahomaZ
Answer: B

Microsoft   MB6-826   MB6-826 examen   MB6-826   MB6-826 examen   MB6-826

NO.9 What are the mandatory steps to take to make the user profiles functional?
Choose the 2 that apply.
A.Attach user profiles to employees.
B.Assign user profiles to variables.
C.Attach user profiles to Microsoft Dynamics AX users.
D.Activate user profiles in the Product Builder parameters form. WCalibriTahomaZ
Answer: AB

Microsoft   MB6-826   MB6-826 examen

NO.10 You are a Product Designer in the Contoso Company. You create a product model for a home theater.
The theater has the following options:
Television: CRT, LCD, Plasma
Number of speakers: 2, 3, 5
Speaker height: 30.5, 45.5, 50.5
Which type of variables do you use to make each option available in the Product Builder configuration
form?
A.Enumerated text variable for the first option, Integer for the second, and Real for the third
B.Enumerated text variable for the first option, Real for the second, and Integer for the third
C.Enumerated text variables for the first and third options, and Real for the second
D.Enumerated text variable for the first, second, and third options WCalibriTahomaZ
Answer: D

certification Microsoft   MB6-826   certification MB6-826   MB6-826   MB6-826   certification MB6-826

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Dernières Microsoft MB4-211 MB6-826 70-648 70-290 de la pratique de l'examen questions et réponses téléchargement gratuit

Avec la version plus nouvelle de Q&A Microsoft MB4-211 MB6-826 70-648 70-290, réussir le test Microsoft MB4-211 MB6-826 70-648 70-290 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.

Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test Microsoft MB4-211 MB6-826 70-648 70-290 à la première fois.

Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de Microsoft MB4-211 MB6-826 70-648 70-290 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.

Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.

Code d'Examen: MB4-211

Nom d'Examen: Microsoft (Solomon 6.0 Customization Manager)

Questions et réponses: 35 Q&As

Code d'Examen: MB6-826

Nom d'Examen: Microsoft (AX 2009 Product Builder)

Questions et réponses: 50 Q&As

Code d'Examen: 70-648

Nom d'Examen: Microsoft (TS: Upgrading MCSA on Windows serv 2003 to Windows Serv 2008)

Questions et réponses: 428 Q&As

Code d'Examen: 70-290

Nom d'Examen: Microsoft (Managing and Maintaining a Microsoft Windows Server 2003 Environment)

Questions et réponses: 268 Q&As

Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.

70-290 Démo gratuit à télécharger: http://www.pass4test.fr/70-290.html

NO.1 You have a file server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). You need
to use Windows Backup to meet the following requirements:
Minimize the number of scheduled backup jobs.
Perform a scheduled normal backup to disk every Friday. Perform a scheduled normal backup to tape
every Friday.
Perform scheduled differential backups to tape every Monday, Tuesday, Wednesday, and Thursday. How
many scheduled jobs should you create from Windows Backup?
A. one
B. two
C. three
D. six
Answer: C

certification Microsoft   70-290   70-290   70-290

NO.2 You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server is configured as
shown in the following table.
You need to create a software mirror of Disk1. What should you do first?
A. Convert Disk3 to a dynamic disk.
B. Create a new NTFS volume on Disk3.
C. Run the Extend Volume Wizard on Disk1.
D. Convert Disk3 to a GUID Partition Table (GPT) disk.
Answer: A

Microsoft   70-290 examen   certification 70-290   70-290 examen

NO.3 You have a server that runs Windows Server 2003 Service Pack 2 (SP2). You need to ensure that a
defragmentation of the server's hard disk drive runs each night.
What should you do?
A. Create a scheduled task that runs Dfrg.msc.
B. Create a scheduled task that runs Defrag.exe.
C. From Computer Management, run Disk Management.
D. From Computer Management, run Disk Defragmenter.
Answer: B

Microsoft   70-290   70-290   70-290

NO.4 You have a file server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).
You use Windows Backup to back up Server1.
You need to view all the backup jobs that are scheduled to run on Server1. What should you do?
A. From Administrative Tools, run Services.
B. From Administrative Tools, run File Server Manager.
C. From Windows System Tools, run Scheduled Tasks.
D. From Windows System Tools, run System Information.
Answer: C

certification Microsoft   70-290 examen   70-290

NO.5 You are the network administrator for your company. The network consists of a single Active Directory
domain. All network servers run Windows Server 2003, and all are members of the domain. All client
computers run Windows XP Professional. Five Web servers host the content for the internal network.
Each one runs IIS and has Remote Desktop connections enabled. Web developers are frequently
required to update content on the Web servers.
You need to ensure that the Web developers can use Remote Desktop Connection to transfer Web
documents from their client computers to the five Web servers.
What should you do?
A. Install the Terminal Server option on all five Web servers. Use Terminal Services Configuration
Manager to modify the session directory setting.
B. Install the Terminal Server option on all five Web servers. Use Terminal Services Configuration
Manager to create a new Microsoft RDP 5.2 connection.
C. On each Web developer's client computer, select the Disk Drives check box in the properties of
Remote Desktop Connection.
D. On each Web developer's client computer, select the Allow users to connect remotely to this computer
check box in the System Properties dialog box.
Answer: C

Microsoft   certification 70-290   certification 70-290   70-290   70-290   certification 70-290

NO.6 You have a server that runs Windows Server 2003 Service Pack 2 (SP2). The server has a backup
tape drive installed.
You need to schedule a backup to tape. The tape must be ejected when the backup job is complete.
Which commands should you include in the scheduled task?
A. Devcon.exe and Poolmon.exe
B. Ntbackup.exe and Devcon.exe
C. Ntbackup.exe and Rsm.exe
D. Rsm.exe and Poolmon.exe
Answer: C

certification Microsoft   certification 70-290   70-290   certification 70-290   70-290 examen

NO.7 You are a network administrator for your company. All servers run Windows Server 2003. You manage a
server that functions as a file server. The data volume on the server is mirrored. Each physical disk is on a
separate controller. One of the hard disks that contains the data volume fails. You discover that the failure
was caused by a faulty SCSI controller. You replace the SCSI controller.
You need to restore the data volume to its previous state. You need to achieve this goal by using the
minimum amount of administrative effort.
What should you do?
A. Run the diskpart active command to activate the failed volume.
B. Convert both disks to basic disks, and then restore the data.
C. Break the mirror, and then re create the mirror.
D. Select a disk in the mirror, and then reactivate the volume.
Answer: D

Microsoft examen   certification 70-290   70-290 examen   70-290

NO.8 You are the network administrator for your company. All network servers run Windows Server 2003.
One of your servers contains a RAID 5 volume. Routine monitoring reveals a failed disk in the set. The
server is running and users are connecting to shared folders on the RAID 5 volume. You shut down the
server and replace the failed disk. Now you need to ensure that the RAID 5 volume is redundant. What
should you do?
A. Initialize the new disk. Select the failed region and then select the Repair Volume option.
B. Import the foreign disk. Select the failed region and then select the Repair Volume option.
C. Initialize the new disk. Select the failed region and then select the Reactivate Disk option.
D. Import the foreign disk. Select the failed region and then select the Reactivate Disk option.
Answer: A

Microsoft   70-290   70-290 examen   70-290   70-290

NO.9 You are the network administrator for your company. The network consists of a single Active Directory
domain. All network servers run Windows Server 2003, and all client computers run Windows XP
Professional.
A user named Peter uses a client computer named Client1. This computer has a locally attached tape
device.
You grant Peter the necessary permissions to perform backups of a member server named Server1.
Peter runs the Backup utility on Client1 to back up the files located on Server1. You need use your client
computer to view the most recent backup logs for Server1. What should you do?
A. Use Notepad to view the contents of the backup report located on Server1.
B. Use Notepad to view the contents of the backup report located on Client1.
C. Use Event Viewer to view the contents of the application log located on Server1.
D. Use Event Viewer to view the contents of the application log located on Client1.
Answer: B

Microsoft   70-290   70-290   certification 70-290   70-290 examen

NO.10 You have a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). You perform
a normal backup of Server1 every Saturday. You need to implement a backup strategy for Server1 to
meet the following requirements:
Minimize the time required to back up files.
On weekdays, back up files that have changed since the last backup. Which type of backup should you
perform on weekdays?
A. copy
B. daily
C. differential
D. incremental
Answer: D

Microsoft   certification 70-290   certification 70-290   70-290 examen   70-290

NO.11 You are the domain administrator for your company's Active Directory domain. All client computers run
Windows 2000 Professional.
You recently deployed 10 new servers that run Windows Server 2003. You placed the servers in a new
organizational unit (OU) named W2K3Servers.
Anne is another network administrator.
You need to configure the appropriate permissions to allow Anne to manage the new servers by using
Terminal Services from her client computer. You need to assign Anne only the permissions she needs to
perform her job.
What should you do?
A. Add Anne's user account to the local Power Users group on each server that runs Windows Server
2003.
B. Add Anne's user account to the Remote Desktop Users group on each server that runs Windows
Server 2003.
C. Assign Anne's user account the Allow Read and the Allow Write permissions for the W2K3Servers OU.
D. Configure the Managed By property for the W2K3Servers OU to Anne's user account.
Answer: B

Microsoft   70-290   70-290 examen

NO.12 You are the network administrator for your company. The network originally consists of a single
Windows NT 4.0 domain.
You upgrade the domain to a single Active Directory domain. All network servers now run Windows
Server 2003, and all client computers run Windows XP Professional. Your staff provides technical support
to the network. They frequently establish Remote Desktop connections with a domain controller named
DC1. You hire 25 new support specialists for your staff. You use Csvde.exe to create Active Directory user
accounts for all 25.
A new support specialist named Paul reports that he cannot establish a Remote Desktop connection with
DC1. He receives the message shown in the Logon Message exhibit. (Click the Exhibit button.)
You open Gpedit.msc on DC1. You see the display shown in the Security Policy exhibit. (Click the Exhibit
button.)
You need to ensure that Paul can establish Remote Desktop connections with DC1. What should you do?
A. Direct Paul to establish a VPN connection with DC1 before he starts Remote Desktop Connection.
B. Direct Paul to set a password for his user account before he starts Remote Desktop Connection.
C. In the local security policy of DC1, disable the Require strong (Windows 2000 or later) session key
setting.
D. In the local security policy of DC1, enable the Disable machine account password changes setting.
Answer: B

certification Microsoft   certification 70-290   certification 70-290   certification 70-290   70-290

NO.13 You are the network administrator for your company. All network servers run Windows Server 2003.
The network includes a file server named File1. File1 contains a single disk for system files and two SCSI
hard disks that comprise a 72 GB mirrored volume with 65 GB of read only data. Users connect to this
data by using shortcuts on their desktops. File1 is scheduled for replacement. You have a scheduled
maintenance window to complete
this task. Before the maintenance window, you build a new server. You need to bring the new server
online with current data and re establish redundancy as quickly as possible. You must also ensure that the
desktop shortcuts will continue to function.
What should you do?
A. name the new server File2. Create a new mirrored volume by using two 72 GB disks.
Connect File2 to the network and copy the data from File1. When copying is complete, shut down the old
File1.
B. name the new server File1. Move both disks from the old File1 to the new File1. Scan the disks for
changes. Import the disks. Connect the new File1 to the network.
C. name the new server File1. Break the mirror on the old File1. Move one of the disks from the old File1
to the new File1. Scan the disk for changes. Initialize the disk. Select the spare disk and create the mirror.
Connect the new File1 to the network.
D. name the new server File1. Remove one of the disks in the mirror from the old File1. Move the disk to
the new File1. Scan the disk for changes. Import the disk. Shut down the old File1 and connect the new
File1 to the network.
Answer: B

certification Microsoft   certification 70-290   70-290   70-290   70-290   certification 70-290

NO.14 Your organization includes two servers named Server1 and Server2 that run Windows Server 2003
Service Pack 2 (SP2).
Server1 and Server2 host the same Web sites.
You need to back up the server configuration on Server1 every hour and then apply the configuration to
Server2.
Which command should you use?
A. IISBack.vbs /backup
B. IISBack.vbs /list
C. IISCnfg.vbs /copy
D. IISCnfg.vbs /save
Answer: C

Microsoft   70-290   certification 70-290   certification 70-290   70-290

NO.15 You are a network administrator for your company. The network consists of a single Active Directory
domain.
A user named Mary works in the information technology (IT) security department. Mary is a member of the
IT Security global group. Mary reports that no one in the ITSecurity global group can access the security
log from the console of a computer named Server1. You need to grant the ITSecurity global group the
minimum rights necessary to view the security log on Server1.
How should you modify the local security policy?
A. Assign the Generate security audits user right to the ITSecurity global group.
B. Assign the Manage auditing and security logs user right to the ITSecurity global group.
C. Assign the Allow logon through Terminal Services user right to the ITSecurity global group.
D. Assign the Act as part of the operating system user right to the ITSecurity global group.
Answer: B

Microsoft examen   certification 70-290   70-290 examen   70-290   70-290 examen

NO.16 You have a file server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). You need
to implement a backup schedule on Server1 to meet the following requirements:
Everyday, back up all files and folders to disk.
Every Friday, back up all files and folders to tape. Every Sunday, Tuesday, and Thursday, back up only the
files and folders that have changed since the previous Friday's backup to tape.
Which backup jobs should you create?
A. a normal backup to disk everyday
a normal backup to tape on Friday
a differential backup to tape on Sunday, Tuesday, and Thursday
B. a normal backup to disk everyday a normal backup to tape on Friday an incremental backup to tape on
Sunday, Tuesday, and Thursday
C. a copy backup to disk everyday
a normal backup to tape on Friday
a differential backup to tape on Sunday, Tuesday and, Thursday
D. a copy backup to disk everyday a normal backup to tape on Friday an incremental backup to tape on
Sunday, Tuesday and, Thursday
Answer: C

Microsoft   70-290 examen   70-290   70-290

NO.17 You are the network administrator for your company. All network servers run Windows Server 2003.
A member server named Server1 is configured to run shadow copies without a storage limit. Server1 has
the disk configuration shown in the following table.
You need to create additional free space on DATA1. You also need to improve the performance of
Server1and ensure that it has sufficient space for shadow copies in the future. Which two actions should
you perform? (Each correct answer presents part of the solution.Choose two.)
A. Delete the shadow copies on DATA1.
B. Delete Backup.bkf on DATA3.
C. In the properties of DATA1, relocate the shadow copies to DATA2.
D. In the properties of DATA1, relocate the shadow copies to DATA3.
E. Delete DATA3 and extend the DATA1 partition to include the space on DATA3.
Answer: AD

Microsoft   certification 70-290   70-290 examen   70-290

NO.18 You are the network administrator for your company. The network consists of a single Active Directory
domain. All network servers run Windows Server 2003. You install the Remote Administration tools on a
server named Server1, selecting all default settings.
In Internet Explorer, you type https://server1/admin. You receive the following error message:
"HTTP Error 404 File or directory not found."
You open IIS Manager and see the configuration shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can use Internet Explorer to administer Server1. What should you do?
A. In Internet Explorer, type http://server1:8099.
B. In Internet Explorer, type http://server1.
C. Install the Remote Desktop Web Connection subcomponent of the World Wide Web services.
D. In Internet Explorer, type https://server1:8098.
E. In Internet Explorer, type https://server1.
Answer: E

Microsoft   certification 70-290   certification 70-290   70-290 examen

NO.19 You have a server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2). You perform
a normal backup of Server1 every Saturday. You need to implement a backup strategy for Server1 to
meet the following requirements:
Minimize the time required to restore files.
On weekdays, back up only files that have changed since the Saturday backup. Which type of backup
should you perform on weekdays?
A. copy
B. daily
C. differential
D. incremental
Answer: C

Microsoft   70-290   certification 70-290   70-290   70-290 examen

NO.20 You are the network administrator for your company. Your network consists of a single Active Directory
domain. All network servers run Windows Server 2003. You successfully install a new server named
Server9. Immediately afterward, you perform the first backup of the server. The date is January 25, 2003.
Next, you add a user named Anne to the local Backup Operators group. You direct Anne to perform
nightly backups of Server9.
One week later, you try to review the backup logs for Server9. The Backup utility displays the information
shown in the exhibit. (Click the Exhibit button.)
You verify that Anne is performing nightly backups. You need to be able to review the backup logs for the
previous week. What should you do?
A. Add your user account to the local Backup Operators group.
B. Direct Anne to use her user account to log on and open the Backup utility.
C. In the Backup utility, select the Verify data after the backup completes check box.
D. Open %windir%\system32\LogFiles. Create a new subfolder named BackupLogs.
Answer: B

Microsoft   certification 70-290   70-290   70-290 examen   70-290