显示标签为“JN0-360”的博文。显示所有博文
显示标签为“JN0-360”的博文。显示所有博文

2014年6月3日星期二

Juniper meilleur examen JN0-370 JN0-360 JN0-632, questions et réponses

Si vous êtes intéressé par l'outil formation Juniper JN0-370 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.

Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Juniper JN0-360.

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Juniper JN0-632, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Juniper JN0-632 coûtant un peu d'argent.

Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Juniper JN0-632. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Juniper JN0-632. Choisir le produit de Pass4Test particulier pour le test Certification Juniper JN0-632 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.

Code d'Examen: JN0-370
Nom d'Examen: Juniper (QFabric, Specialist (JNCIS-QF))
Questions et réponses: 108 Q&As

Code d'Examen: JN0-360
Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-SP))
Questions et réponses: 252 Q&As

Code d'Examen: JN0-632
Nom d'Examen: Juniper (Juniper Networks Certified Internet Professional, Security (JNCIP-SEC))
Questions et réponses: 169 Q&As

Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test Juniper JN0-632, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat Juniper JN0-632. Vous aurez une space plus grande à se développer.

JN0-632 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-632.html

NO.1 Which three security concerns can be addressed by a tunnel mode IPsec VPN secured by AH.?
(Choose three.)
A. data integrity
B. data confidentiality
C. data authentication
D. outer IP header confidentiality
E. outer IP header authentication
Answer: ACE

certification Juniper   JN0-632   JN0-632   JN0-632 examen   certification JN0-632

NO.2 Which command do you use to display the status of an antivirus database update?
A. show security utm anti-virus status
B. show security anti-virus database status
C. show security utm anti-virus database
D. show security utm anti-virus update
Answer: A

certification Juniper   JN0-632 examen   JN0-632   certification JN0-632

NO.3 Which statement contains the correct parameters for a route-based IPsec VPN?
A. [edit security ipsec]
user@host# show
proposal ike1-proposal {
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy {
perfect-forward-secrecy {
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel {
interface ge-0/0/1.0;
ike {
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
B. [edit security ipsec]
user@host# show
proposal ike1-proposal {
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy {
perfect-forward-secrecy {
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel {
interface st0.0;
ike {
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
C. [edit security ipsec]
user@host# show
proposal ike1-proposal {
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy {
perfect-forward-secrecy {
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel {
bind-interface ge-0/0/1.0;
ike {
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
D. [edit security ipsec]
user@host# show
proposal ike1-proposal {
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}policy ipsec1-policy {
perfect-forward-secrecy {
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel {
bind-interface st0.0;
ike {
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
Answer: D

Juniper   JN0-632 examen   JN0-632   JN0-632

NO.4 Which two statements regarding symmetric key encryption are true? (Choose two.)
A. The same key is used for encryption and decryption.
B. It is commonly used to create digital certificate signatures.
C. It uses two keys: one for encryption and a different key for decryption.
D. An attacker can decrypt data if the attacker captures the key used for encryption.
Answer: AD

certification Juniper   certification JN0-632   JN0-632   JN0-632 examen

NO.5 Which zone is system-defined?
A. security
B. functional
C. junos-global
D. management
Answer: C

Juniper examen   JN0-632 examen   JN0-632   certification JN0-632   JN0-632   JN0-632 examen

NO.6 You want to allow your device to establish OSPF adjacencies with a neighboring device connected to
interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration
hierarchy must you permit OSPF traffic?
A. [edit security policies from-zone HR to-zone HR]
B. [edit security zones functional-zone management protocols]
C. [edit security zones protocol-zone HR host-inbound-traffic]
D. [edit security zones security-zone HR host-inbound-traffic protocols]
Answer: D

Juniper examen   certification JN0-632   JN0-632 examen   JN0-632 examen

NO.7 Which two statements are true about hierarchical architecture? (Choose two.)
A. You can assign a logical interface to multiple zones.
B. You cannot assign a logical interface to multiple zones.
C. You can assign a logical interface to multiple routing instances.
D. You cannot assign a logical interface to multiple routing instances.
Answer: BD

Juniper   certification JN0-632   JN0-632 examen   JN0-632

NO.8 Which configuration keyword ensures that all in-progress sessions are re-evaluated upon committing a
security policy change?
A. policy-rematch
B. policy-evaluate
C. rematch-policy
D. evaluate-policy
Answer: A

certification Juniper   JN0-632 examen   JN0-632 examen   JN0-632 examen   certification JN0-632

2014年1月1日星期三

L'avènement de la certification Juniper pratique d'examen JN0-360 questions et réponses

Le produit de Pass4Test peut assurer les candidats à réussir le test Juniper JN0-360 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.

Si vous êtes intéressé par l'outil formation Juniper JN0-360 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.

Pass4Test peut non seulement vous aider à réussir votre rêve, mais encore vous offre le service gratuit pendand un an après vendre en ligne. Q&A offerte par l'équipe de Pass4Test vous assure à passer 100% le test de Certification Juniper JN0-360.

Les produits de Pass4Test sont préparés pour le test Certification Juniper JN0-360, y compris les formations et les informations ciblées au test Juniper JN0-360. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.

Code d'Examen: JN0-360
Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-SP))
Questions et réponses: 252 Q&As

Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test JN0-360 est lequel très important dans les tests de Certification Juniper. Pour être qualifié de Juniper, on doit obtenir le passport de test Juniper JN0-360.

Pass4Test est un site particulier à offrir les guides de formation à propos de test certificat IT. La version plus nouvelle de Q&A Juniper JN0-360 peut répondre sûrement une grande demande des candidats. Comme tout le monde le connait, le certificat Juniper JN0-360 est un point important pendant l'interview dans les grandes entreprises IT. Ça peut expliquer un pourquoi ce test est si populaire. En même temps, Pass4Test est connu par tout le monde. Choisir le Pass4Test, choisir le succès. Votre argent sera tout rendu si malheureusement vous ne passe pas le test Juniper JN0-360.

JN0-360 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-360.html

NO.1 Which Junos platform supports provider bridging?
A. T Series devices
B. SRX Series devices
C. MX Series devices
D. MAG Series devices
Answer: D

Juniper   JN0-360   JN0-360 examen   certification JN0-360

NO.2 Which two statements are true about MPLS VPNs? (Choose two.)
A. With Layer 3 VPNs, the provider's routers participate in the customer's Layer 3 routing.
B. MPLS VPNs are designed to run over private networks rather than the public Internet.
C. With Layer 2 VPNs, the provider does not participate in the routing of the customer's private IP
traffic.
D. MPLS VPN tunnels are always encrypted.
Answer: B,D

Juniper examen   JN0-360   JN0-360   JN0-360

NO.3 Which label operation is performed by an MPLS transit router?
A. inject
B. pop
C. push
D. swap
Answer: A

certification Juniper   JN0-360   JN0-360   JN0-360 examen

NO.4 What are Martian addresses on a Junos device?
A. IP addresses that are reserved for use only with MPLS VPNs.
B. IP addresses that are never installed in the routing table.
C. IP addresses that are reserved for use only with GRE tunnels.
D. IP addresses specifically used for out-of-band management.
Answer: A

Juniper   JN0-360   certification JN0-360   certification JN0-360   JN0-360 examen
7. Which statement correctly describes the difference between a generated and an aggregate
route?
A. An aggregate route can be a supernet whereas generated routes are classful.
B. A generated route has a forwarding next hop that is inherited from a contributing route.
C. An aggregate route has a forwarding next hop that is inherited from a contributing route.
D. Only aggregate routes can be re-advertised through BGP using a policy.
Answer: B

certification Juniper   JN0-360   JN0-360
8. Which statement is true regarding the default master routing instance?
A. All IPv4 routes in the master routing instance are shared with user-defined routing instances.
B. Interface routes in the master routing instance are shared with user-defined routing instances.
C. Routes in the master routing instance are not shared with user-defined routing instances.
D. All routes in the master routing instance are shared with user-defined routing instances.
Answer: C

certification Juniper   JN0-360   certification JN0-360   JN0-360 examen
9. Which routing table contains the route information for the user-defined routing instance
called Candidate1?
A. inet.Candidate1.0
B. Candidate1.inet.0
C. inet.0
D. Candidate1-inet.0
Answer: B

Juniper   JN0-360 examen   JN0-360 examen
10. Which two routing-instance types are used for non-VPN-related applications? (Choose two.)
A. virtual-router
B. vrf
C. forwarding
D. vpls
Answer: A,C

Juniper examen   JN0-360   certification JN0-360   certification JN0-360

NO.5 For a network running single-area OSPF, how would you decrease the size of the link-state
database (LSDB)?
A. Implement RIP as an overlay protocol on all devices.
B. Add more devices to the OSPF network to help with LSDB processing.
C. Reduce the frequency of hello timers throughout the network.
D. Implement OSPF areas.
Answer: B

Juniper   JN0-360 examen   JN0-360

NO.6 In which environment would you run BGP?
A. a company spread across multiple floors of a building
B. a company with a single office
C. a home network
D. the public Internet
Answer: C

certification Juniper   JN0-360   certification JN0-360   JN0-360   JN0-360

Est-ce que vous vous souciez encore pour passer le test Juniper JN0-360? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test Juniper JN0-360, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test Juniper JN0-360. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.

2013年8月15日星期四

Pass4Test offre une formation sur Juniper JN0-360 matériaux examen

Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.


Finalement, la Q&A Juniper JN0-360 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Juniper JN0-360 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Juniper, vous aurez un meilleur salaire et une plus grande space à se développer.


Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.


Code d'Examen: JN0-360

Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-SP))

Questions et réponses: 252 Q&As

Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test Juniper JN0-360 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.


JN0-360 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-360.html


NO.1 You are logged into a router and have navigated to the (edit routing-options] level of the hierarchy. You
have been asked to create a static route that will use 10.10.10.1 as its primary next-hop and 10.10.10.5
as its secondary next-hop.
Which command correctly configures this scenario?
A.set static route 8/8 10.10.10.1 qualified-next-hop 10.10.10.5 pref 10
B.set static route 8/8 next-hop 10.10.10.1 secondary-next-hop 10.10.10.5 preference 10
C.set static route 8/8 next-hop 10.10.10.1 qualified-next-hop 10.10.10.5 preference 10
D.set static route 8/8 next-hop [10.10.10.1 10.10.10.5] pref 10
Answer: C

Juniper   JN0-360   certification JN0-360   JN0-360   certification JN0-360

NO.2 You have configured an IP-IP tunnel between Router A and Router B
Which Junos operational mode command is used to verify that the tunnel interface is up and operational?
A.show chassis tunnel status
B.show tunnel interface
C.show interfaces terse
D.show interfaces tunnel
Answer: C

Juniper   JN0-360   JN0-360   JN0-360

NO.3 Which IS-IS packet is used to determine the level of an IS-IS neighbor?
A.IIH
B.LSP
C.PSNP
D.CSNP
Answer: A

Juniper   JN0-360 examen   JN0-360   JN0-360

NO.4 You must configure an OSPF area that does not accept type 3 link-state advertisements (LSAs) from
area 0 (other than the default route) You have configured your area to be stub, but you still see type 3
LSAs.
What will account for this behavior?
A.You should have configured your area as totally stubby
B.You should have used a not-so-stubby-area
C.You are experiencing a routing loop
D.You have exported routes into OSPF
Answer: A

Juniper examen   JN0-360   JN0-360   JN0-360   JN0-360

NO.5 Click the Exhibit button
You work for the regional Internet service provider shown in the exhibit You have a partial BGP table and
are receiving a 10 100/16 route from your upstream ISP You have been asked to configure a default route
that can be sent to your downstream customer This route should forward customer traffic toward your
upstream Tier 11SP as long as the 10.100/16 route is present.
What would accomplish this goal?
A.Create and announce an aggregate default route
B.Create and announce a static default route with a next-hop of discard
C.Create and announce a static default route with a next-hop of reject
D.Create and announce a generated default route
E.Create an advertise-map with exist-map
Answer: E

Juniper   JN0-360   JN0-360   certification JN0-360   JN0-360

NO.6 Which two statements describe differences between IPv4 and IPv6.? (Choose two)
A.IPsec is built into IPv6
B.IPv6 uses a 32-bit (4-byte) address and can support up to 4,294,967,296 addresses
C.IPv4 supports extension headers whereas IPv6 options are integrated into the base
D.IPv6 eliminates the need for NAT
Answer: AD

Juniper   JN0-360   JN0-360   JN0-360   certification JN0-360

NO.7 Click the Exhibit button
In the exhibit, OSPF routers R1, R2, R3, and R4 come up, in order, at 1-minute intervals
Which router will be the designated router?.
A.R1
B.R2
C.R3
D.R4
Answer: A

certification Juniper   JN0-360 examen   JN0-360 examen   JN0-360

NO.8 Which Junos operational mode command is used to verify that load balancing is working as expected?
A.show route all
B.show route extensive
C.show route balancing
D.show route forwarding-table
Answer: D

certification Juniper   JN0-360 examen   JN0-360   certification JN0-360   JN0-360

NO.9 You are logged into a router and have navigated to the [edit routing-options] level of the hierarchy. You
have been asked to create a static route that will use 43 18 7 1 as its primary next-hop and 76 1310 2 as
its secondary next-hop.
Which command correctly configures this setup?
A.set static route 0/0 76.13.10.2 qualified-next-hop 43.18.7.1 pref 10
B.set static route 0/0 next-hop 43.18.7.1 secondary-next-hop 76.13.10.2 preference 10
C.set static route 0/0 next-hop [76.13.10.2 10.10.10.5] pref 10
D.set static route 0/0 next-hop 43.18.7.1 qualified-next-hop 76.13.10.2 preference 10
Answer: D

certification Juniper   JN0-360   certification JN0-360   JN0-360 examen   JN0-360

NO.10 You have been asked to define a default gateway for traffic leaving a router. This route should use
interface so-0/0/0 as its next-hop.Which type of route would be suited for this scenario?
A.a static route
B.a generated route
C.a martian route
D.an aggregate route
Answer: A

Juniper   JN0-360   JN0-360

NO.11 Click the Exhibit button
Referring to the network illustrated in the exhibit, how does router A reach destinations in area 49.2222?
A.Router A will use the routes from area 49.2222; it learns from router B
B.Router A will see the attached bit from router B and create a default route
C.Router A must have a default route manually configured
D.Router A will receive a default route in the IS-IS update from router B
Answer: B

Juniper   JN0-360   JN0-360 examen   JN0-360   certification JN0-360

NO.12 What are two valid actions that can be applied to a frame by a Layer 2 firewall filter?
(Choose two)
A.Log
B.loss-priority
C.sample
D.count
Answer: BD

Juniper examen   certification JN0-360   certification JN0-360

NO.13 Router A is an OSPF router connected to both Area 0 and Area 1 Area 1 has been configured as a stub
area Which two LSA types does Router A suppress from Area 1 ?
A.Router LSA
B.External LSA
C.Summary LSA
D.ASBR Summary LSA
Answer: B D

Juniper examen   certification JN0-360   JN0-360   certification JN0-360

NO.14 Which two values displayed in the output from the show spanning-tree MSTP configuration command
must match on all switches participating in the same MSTP region? (Choose two)
A.root bridge identifier
B.authentication checksum
C.context identifier
D.configuration digest
Answer: CD

Juniper   JN0-360   JN0-360 examen   JN0-360 examen

NO.15 Which BGP state denotes a fully operational session?
A.Established
B.Active
C.Operational
D.Connect
Answer: A

Juniper   JN0-360   JN0-360   JN0-360   JN0-360

NO.16 Click the Exhibit button
Based on the illustration of the VPLS topology shown in the exhibit, which statement is true?
A.PE-C must have a spanning-tree protocol enabled
B.CE-C must have BGP enabled
C.Traffic forwarded from PE-C to PE-A is forwarded on to PE-B
D.Traffic forwarded from PE-C to PE-A is not forwarded on to PE-B
Answer: D

Juniper   JN0-360 examen   JN0-360 examen   JN0-360

NO.17 You have been asked to configure an IPv6 address for a group of interfaces that could belong on
different routers. If a packet is sent to that address, it should be received by all routers in the group.
Which address type would be suited for these requirements?
A.Unicast
B.Multicast
C.Anycast
D.Broadcast
Answer: B

Juniper examen   JN0-360   JN0-360 examen   JN0-360   JN0-360

NO.18 What is the function of the hop limit field in the IPv6 header?
A.It limits the diameter of the network to 20 hops
B.It sets the number of hops in the network to be equal to the MPLS header time-to-live (TTL)
C.It replaces the time-to-live (TTL) field in IPv4
D.It represents future extensibility to the protocol
Answer: C

Juniper examen   JN0-360   certification JN0-360

NO.19 Which role does the router ID (RID) have in the BGP route selection process?
A.The router ID is evaluated immediately after MED to determine route preference
B.The router ID is evaluated last in the route selection process
C.The router ID is evaluated after the cluster length and a lower router ID is chosen
D.The router ID is evaluated after analyzing the IGP metric cost
Answer: C

Juniper   JN0-360   JN0-360 examen   JN0-360 examen   JN0-360 examen

NO.20 You have recently implemented a graceful Routing-Engine switchover (GRES) and want to further
reduce down time if a Routing Engine (RE) failure occurs.
Which two features can be configured on this device to reduce its downtime in this situation? (Choose
two)
A.VRRP
B.GR
C.BFD
D.NSR
Answer: B D

Juniper examen   JN0-360   certification JN0-360   JN0-360 examen   JN0-360

Le Certificat de Juniper JN0-360 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat Juniper JN0-360, c'est-à-dire avoir une grande fortune. Le Certificat Juniper JN0-360 peut bien tester des connaissances professionnelles IT. La Q&A Juniper JN0-360 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.


2013年7月31日星期三

Les meilleures Juniper JN0-332 JN0-101 JN0-360 examen pratique questions et réponses

Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test Juniper JN0-332 JN0-101 JN0-360, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.


Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de Juniper après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.


Dans cette époque glorieuse, l'industrie IT est devenue bien intense. C'est raisonnable que le test Juniper JN0-332 JN0-101 JN0-360 soit un des tests plus populaires. Il y a de plus en plus de gens qui veulent participer ce test, et la réussite de test Juniper JN0-332 JN0-101 JN0-360 est le rêve pour les professionnels ambitieux.


La population de la Certification Juniper JN0-332 JN0-101 JN0-360 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.


Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo Juniper JN0-332 JN0-101 JN0-360 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test Juniper JN0-332 JN0-101 JN0-360 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test Juniper JN0-332 JN0-101 JN0-360.


Code d'Examen: JN0-332

Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist, SEC (JNCIS-SEC))

Questions et réponses: 406 Q&As

Code d'Examen: JN0-101

Nom d'Examen: Juniper (JNCIA-JUNOS EXAM OBJECTIVES)

Questions et réponses: 190 Q&As

Code d'Examen: JN0-360

Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-SP))

Questions et réponses: 143 Q&As

JN0-332 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-332.html


NO.1 Which two statements regarding external authentication servers for firewall user authentication are
true? (Choose two.)
A. Up to three external authentication server types can be used simultaneously.
B. Only one external authentication server type can be used simultaneously.
C. If the local password database is not configured in the authentication order, and the configured
authentication server is unreachable, authentication is bypassed.
D. If the local password database is not configured in the authentication order, and the configured
authentication server rejects the authentication request, authentication is rejected.
Answer: B,D

Juniper examen   certification JN0-332   JN0-332

NO.2 Which command do you use to display the status of an antivirus database update?
A. show security utm anti-virus status
B. show security anti-virus database status
C. show security utm anti-virus database
D. show security utm anti-virus update
Answer: A

certification Juniper   JN0-332 examen   JN0-332   JN0-332   JN0-332

NO.3 Click the Exhibit button.
System services SSH, Telnet, FTP, and HTTP are enabled on the SRX Series device.
Referring to the configuration shown in the exhibit, which two statements are true? (Choose two.)
A. A user can use SSH to interface ge-0/0/0.0 and ge-0/0/1.0.
B. A user can use FTP to interface ge-0/0/0.0 and ge-0/0/1.0.
C. A user can use SSH to interface ge-0/0/0.0.
D. A user can use SSH to interface ge-0/0/1.0.
Answer: B,C

Juniper examen   JN0-332 examen   JN0-332   certification JN0-332   JN0-332 examen

NO.4 Which three security concerns can be addressed by a tunnel mode IPsec VPN secured by AH?
(Choose three.)
A. data integrity
B. data confidentiality
C. data authentication
D. outer IP header confidentiality
E. outer IP header authentication
Answer: A,C,E

Juniper examen   certification JN0-332   JN0-332

NO.5 You must configure a SCREEN option that would protect your router from a session table flood.Which
configuration meets this requirement?
A. [edit security screen]
user@host# show
ids-option protectFromFlood
{
icmp
{
ip-sweep threshold 5000;
flood threshold 2000;
}
}
B. [edit security screen]
user@host# show
ids-option protectFromFlood
{
tcp
{
syn-flood
{
attack-threshold 2000;
destination-threshold 2000;
}
}
}
C. [edit security screen]
user@host# show
ids-option protectFromFlood
{
udp
{
flood threshold 5000;
}
}
D. [edit security screen]
user@host# show
ids-option protectFromFlood
{
limit-session
{
source-ip-based 1200;
destination-ip-based 1200;
}
}
Answer: D

Juniper   JN0-332   JN0-332

NO.6 A user wants to establish an HTTP session to a server behind an SRX device but is being pointed to
Web page on the SRX device for additional authentication.Which type of user authentication is
configured?
A. pass-through with Web redirect
B. WebAuth with HTTP redirect
C. WebAuth
D. pass-through
Answer: A

certification Juniper   certification JN0-332   certification JN0-332   JN0-332   certification JN0-332

NO.7 Which two statements are true about hierarchical architecture? (Choose two.)
A. You can assign a logical interface to multiple zones.
B. You cannot assign a logical interface to multiple zones.
C. You can assign a logical interface to multiple routing instances.
D. You cannot assign a logical interface to multiple routing instances.
Answer: B,D

Juniper   JN0-332 examen   certification JN0-332

NO.8 Which UTM feature requires a license to function?
A. integrated Web filtering
B. local Web filtering
C. redirect Web filtering
D. content filtering
Answer: A

Juniper   JN0-332 examen   JN0-332   JN0-332

NO.9 Which two statements regarding symmetric key encryption are true? (Choose two.)
A. The same key is used for encryption and decryption.
B. It is commonly used to create digital certificate signatures.
C. It uses two keys: one for encryption and a different key for decryption.
D. An attacker can decrypt data if the attacker captures the key used for encryption.
Answer: A,D

Juniper   JN0-332 examen   JN0-332 examen   JN0-332 examen   JN0-332

NO.10 Click the Exhibit button.
In the exhibit, a new policy named DenyTelnet was created. You notice that Telnet traffic is still allowed.
Which statement will allow you to rearrange the policies for the DenyTelnet policy to be evaluated before
your Allow policy?
A. insert security policies from-zone A to-zone B policy DenyTelnet before policy Allow
B. set security policies from-zone B to-zone A policy DenyTelnet before policy Allow
C. insert security policies from-zone A to-zone B policy DenyTelnet after policy Allow
D. set security policies from-zone B to-zone A policy Allow after policy DenyTelnet
Answer: A

Juniper   JN0-332   JN0-332   certification JN0-332

NO.11 Which statement contains the correct parameters for a route-based IPsec VPN?
A. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
interface ge-0/0/1.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
B. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
interface st0.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
C. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
bind-interface ge-0/0/1.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
D. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
bind-interface st0.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
Answer: D

certification Juniper   certification JN0-332   JN0-332

NO.12 You want to allow your device to establish OSPF adjacencies with a neighboring device connected to
interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration
hierarchy must you permit OSPF traffic?
A. [edit security policies from-zone HR to-zone HR]
B. [edit security zones functional-zone management protocols]
C. [edit security zones protocol-zone HR host-inbound-traffic]
D. [edit security zones security-zone HR host-inbound-traffic protocols]
Answer: D

certification Juniper   certification JN0-332   JN0-332

NO.13 Which type of Web filtering by default builds a cache of server actions associated with each URL it has
checked?
A. Websense Redirect Web filtering
B. integrated Web filtering
C. local Web filtering
D. enhanced Web filtering
Answer: B

Juniper examen   certification JN0-332   JN0-332   JN0-332 examen

NO.14 Which security or functional zone name has special significance to the Junos OS?
A. self
B. trust
C. untrust
D. junos-global
Answer: D

Juniper   JN0-332 examen   JN0-332 examen

NO.15 Which configuration keyword ensures that all in-progress sessions are re-evaluated upon committing a
security policy change?
A. policy-rematch
B. policy-evaluate
C. rematch-policy
D. evaluate-policy
Answer: A

Juniper   JN0-332   JN0-332

NO.16 Click the Exhibit button.
Your IKE SAs are up, but the IPsec SAs are not up.Referring to the exhibit, what is the problem?
A. One or more of the phase 2 proposals such as authentication algorithm, encryption algorithm do not
match.
B. The tunnel interface is down.
C. The proxy IDs do not match.
D. The IKE proposals do not match the IPsec proposals.
Answer: C

certification Juniper   certification JN0-332   JN0-332   certification JN0-332

NO.17 Click the Exhibit button.
You need to alter the security policy shown in the exhibit to send matching traffic to an IPsec VPN tunnel.
Which command causes traffic to be sent through an IPsec VPN named remote-vpn.?
A. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then tunnel remote-vpn
B. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then tunnel ipsec-vpn remote-vpn
C. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then permit ipsec-vpn remote-vpn
D. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then permit tunnel ipsec-vpn remote-vpn
Answer: D

Juniper   certification JN0-332   JN0-332   JN0-332 examen

NO.18 Regarding content filtering, what are two pattern lists that can be configured in the Junos OS? (Choose
two.)
A. protocol list
B. MIME
C. block list
D. extension
Answer: B,D

certification Juniper   JN0-332   JN0-332   certification JN0-332

NO.19 Which three statements are true regarding IDP? (Choose three.)
A. IDP cannot be used in conjunction with other Junos security features such as SCREEN options, zones,
and security policy.
B. IDP inspects traffic up to the Application Layer.
C. IDP searches the data stream for specific attack patterns.
D. IDP inspects traffic up to the Presentation Layer.
E. IDP can drop packets, close sessions, prevent future sessions, and log attacks for review by network
administrators when an attack is detected.
Answer: B,C,E

Juniper   JN0-332 examen   JN0-332   JN0-332   certification JN0-332

NO.20 Which zone is system-defined?
A. security
B. functional
C. junos-global
D. management
Answer: C

Juniper   JN0-332 examen   JN0-332   JN0-332   JN0-332   JN0-332