2014年7月9日星期三

Dernières HP HP2-B105 HP2-K36 HP2-B109 examen pratique questions et réponses

Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A HP HP2-B105 comme votre guide d'étude.

Le programme de formation HP HP2-K36 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

Beaucoup de gens trouvent difficile à passer le test HP HP2-B109, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test HP HP2-B109 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel HP HP2-B105 peut vous assurer à réussir 100% le test HP HP2-B105. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Code d'Examen: HP2-B105
Nom d'Examen: HP (Selling HP DesignJet Production Printing)
Questions et réponses: 35 Q&As

Code d'Examen: HP2-K36
Nom d'Examen: HP (Support and Service HP StoreVirtual Solutions)
Questions et réponses: 46 Q&As

Code d'Examen: HP2-B109
Nom d'Examen: HP (Selling HP Printing and Personal Systems Hardware)
Questions et réponses: 74 Q&As

Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification HP HP2-B109. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.

HP2-K36 Démo gratuit à télécharger: http://www.pass4test.fr/HP2-K36.html

NO.1 Which statement about Remote Copy is true?
A. The CMC software always deletes the last fully synchronized remote snapshot after creation.
B. It is a synchronous replication of data to a machine in a geographically-separate location.
C. If the network link goes offline during the process, copying resumes where it left off when the link
is restored.
D. A remote volume can be rolled back until you convert the remote volume into a primary volume.
Answer: B

HP examen   certification HP2-K36   certification HP2-K36   HP2-K36   certification HP2-K36
Reference:http://h20565.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/doc
Display/resource.process/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.en
dCacheTok=com.vignette.cachetoken&javax.portlet.rid_ba847bafb2a2d782fcbb0710b053ce01=do
cDisplayResURL&javax.portlet.rst_ba847bafb2a2d782fcbb0710b053ce01=wsrpresourceState%3Ddo
cId%253Demr_na-c035622171%257CdocLocale%253Den_US&javax.portlet.tpst=ba847bafb2a2d78
2fcbb0710b053ce01_ws_B I&ac.admitted=1383023508885.876444892.492883150(page 7 and 8)

NO.2 A large healthcare customer wants to implement an HP StoreVirtual 4000 Storage solution.
The customer has two fire zones within the main data center and needs 24x7 availability with
maximum data redundancy. The customer plans to implement an HP StoreVirtual 4000 Storage
solution that is distributed across the fire zones.
Which Network RAID configuration should you recommend to meet these requirements?
A. Network RAID 50+1
B. Network RAID 60+2
C. Network RAID 10+2
D. Network RAID 10+1
Answer: D

HP   certification HP2-K36   HP2-K36   certification HP2-K36   HP2-K36
Reference:http://kvaes.wordpress.com/ 2012 / 01 / 04 /p4500-lefthand-p4x00-network-raid-explained/

NO.3 In the event of a site failure in a multi-site configuration that is configured according to HP
best practices, how does the HP StoreVirtual 4000 Storage system handle the failover and tailback
process?
A. Failover is automatic, but fallback is manual.
B. Failover is automatic, but failback requires additional scripting.
C. Failover and failback are both manual processes.
D. Failover and failback are completely automatic.
Answer: D

HP examen   HP2-K36   certification HP2-K36   HP2-K36 examen   HP2-K36   certification HP2-K36

NO.4 A media and broadcasting customer has an HP StoreVirtual 4000 Storage environment with
eight 4530 SAS nodes. Approximately 50% of the I/O is large sequential; therefore, the configuration
is set for maximum performance. After replacing a defective network switch, the customer
experiences performance and connectivity issues and asks you to solve the problem.
What should you investigate first?
A. If jumbo frames are enabled on the whole path
B. If Spanning Tree Protocol (STP) is enabled
C. If Active/Passive (A/P) bonding is enabled
D. If the switch has the actual firmware installed
Answer: A

certification HP   certification HP2-K36   HP2-K36   HP2-K36 examen   certification HP2-K36

NO.5 You have just completed the initial configuration of an HP StoreVirtual 4000 Storage cluster
What can you use to check for potential configuration issues such as improper NIC teaming, data
protection with Network RAID, and optimum load balancing across nodes in the cluster?
A. Insight Remote Support
B. SAN Health Page
C. SAN IQ Health check
D. Best Practice Analyzer
Answer: D

HP   HP2-K36 examen   HP2-K36 examen
Reference:http://h20195.www2.hp.com/V2 /GetPDF.aspx%2F4AA4-2922ENW.pdf(page 6)

NO.6 Which statements are correct about how Recovery Manager is used to recover data from
snapshots? (Select two.)
A. It is a cluster-aware application that will automatically failover to other servers.
B. It does not allow Linux / Unix formatted snapshots to be mounted.
C. It supports SmartClone and Remote Copy Snapshots.
D. It supports a total of five snapshots per volume to be mounted.
E. It allows iSCSI and Fibre Channel attached volumes to be restored.
Answer: D

HP examen   HP2-K36 examen   HP2-K36 examen
Reference:http://h20565.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/doc
Display/resource.process/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.en
dCacheTok=com.vignette.cachetoken&javax.portlet.rid_ba847bafb2a2d782fcbb0710b053ce01=do
cDisplayResURL&javax.portlet.rst_ba847bafb2a2d782fcbb0710b053ce01=wsrpresourceState%3Ddo
cId%253Demr_na-c033862191%257CdocLocale%253Den_US&javax.portlet.tpst=ba847bafb2a2d78
2fcbb0710b053ce01_ws_B I&ac.admitted=1383021943001.876444892.492883150(page 10)

NO.7 Which functionality was introduced with HP LeftHand OS 10.x?
A. Windows Server 2008
B. Active Directory
C. FCoE
D. Quad CPU support for VSA
Answer: B

HP   HP2-K36 examen   HP2-K36 examen   HP2-K36 examen
Reference:https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=S
t oreVirtualSW_10.5

NO.8 You notice an error icon on a storage system in the navigation tree in the CMC. From the
server the CMC is running on, you can successfully ping the IP address of the storage system. What
is the most likely cause of this problem?
A. The management process is not responding.
B. The license for the storage node has expired.
C. The storage node has locked up.
D. The storage node was not assigned a name during installation.
Answer: B

HP   HP2-K36   HP2-K36 examen   certification HP2-K36   certification HP2-K36

没有评论:

发表评论