Certification Avaya de téléchargement gratuit pratique d'examen 6102.1, questions et réponses

Participer au test Avaya 6102.1 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat Avaya 6102.1 symbole bien la professionnalité d'un travailleur dans cette industrie.

La Q&A de Pass4Test vise au test Certificat Avaya 6102.1. L'outil de formation Avaya 6102.1 offert par Pass4Test comprend les exercices de pratique et le test simulation. Vous pouvez trouver les autres sites de provider la Q&A, en fait vous allez découvrir que c'est l'outil de formation de Pass4Test qui offre les documentaions plus compètes et avec une meilleure qualité.

On doit faire un bon choix pour passer le test Avaya 6102.1. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification Avaya 6102.1 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.

Code d'Examen: 6102.1
Nom d'Examen: Avaya (Avaya Virtual Services Platform 9000 Implementation Exam)
Questions et réponses: 67 Q&As

Il demande les connaissances professionnelles pour passer le test Avaya 6102.1. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat Avaya 6102.1, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

6102.1 Démo gratuit à télécharger: http://www.pass4test.fr/6102.1.html

NO.1 Which two management ports are available on the CP module? (Choose two.)
A. Serial interface
B. USB (host) interface
C. Ethernet interface
D. Modem interface
Answer: A,D

Avaya examen   certification 6102.1   certification 6102.1   6102.1 examen

NO.2 A Split Multi Link Trunking (SMIT) for switch clustering is being configured.
Which statement is a configuration requirement for the SMIT?
A. The CP-Limit is configured on edge switch stacks.
B. VLANs that are defined on the SMLT are also defined on the tote IST.
C. Neighboring edge switch stacks should be connected to each other via the DMLT connection to add
resilient paths in the event of an SMLT failure.
D. Alternate the primary path of the SMLT connection Lo load balance the switch core.
Answer: B

Avaya examen   certification 6102.1   6102.1   6102.1 examen

NO.3 A campus network requirement is to introduce Virtual Routing and Forwarding (VRF) in the existing
Virtual Services Platform (VSP) 9000 core. The technician needs to configure VRF on the VSP 9000.
Which statement represents the proper order for configuring a new VRF?
A. Create a new VLAN, add an IP address, create a VRF, and move the VLAN to the new VRF.
B. Create a VRF, add an IP address, create a new VLAN, and move the VLAN to the new VRF.
C. Create a VRF, create a new VLAN, add an IP address, and move the VLAN to the new VRF.
D. Create VRF, create a new VLAN, move the VLAN to the new VRF, and add an IP address.
Answer: D

Avaya   6102.1 examen   6102.1 examen   certification 6102.1   certification 6102.1   certification 6102.1

NO.4 Which command can be used to determine the management IPv6 address on the Virtual Services
Platform (VSP) O000?
A. Show interfaces mgmtEthernet 1/1
B. Show ip interface vrf mgmtRouter
C. Show ipv6 interface vrf mgmtRouter
D. Show ipv6 address interface
Answer: D

Avaya examen   6102.1 examen   6102.1 examen

NO.5 Given the following ACL applied to an interface:
filter acl ace 1 5 name "xxxx" filter acl ace action 1 5 deny
filter acl ace ip 1 5 ip-protocol-type eq tcp
filter acl ace protocol 1 5 dst-port eq 23
filter acl ace 1 5 enable
What is the result of this filter?
A. permit telnet traffic
B. deny ftp traffic
C. permit only tcp traffic
D. deny telnet traffic
E. deny only tcp traffic
Answer: D

certification Avaya   6102.1 examen   6102.1 examen   certification 6102.1   certification 6102.1

NO.6 A customer is mirroring multiple ports to a single monitor port.
What happens if the mirrored traffic exceeds the bandwidth of the monitor port?
A. The traffic will be buffered until there is available bandwidth.
B. The excess traffic will be dropped randomly.
C. The excess traffic will be dropped based upon the mirror priority of the ingress port.
D. The excess traffic will be dropped based upon the port priority of the ingress port.
Answer: B

certification Avaya   6102.1   certification 6102.1   certification 6102.1

NO.7 Which types of packets will port mirroring not capture.?
A. Packets that are dropped on the ingress MAC
B. Packets that are destined for the standby CP
C. Packets that are properly forwarded through the VSP
D. Packets that have a destination address of 255.255.255.255
Answer: A

certification Avaya   6102.1 examen   6102.1 examen

NO.8 A Virtual Services Platform (VSP) 9000 chassis has the following connections:
Four 10GBaseER core connections in ports 3/4 , 3/8, 4/4, 4/8 (9024XL cards)
40 Copper 100BaseT connections for server aggregation (9048GT card)
How many Switch Fabric (SF) modules need to be installed in the roar of the chassis to ensure that all of
the IO cards operate at full performance, even if a single SF modules fails (n + 1 SF redundancy)?
A. Install three SFs in St modules 1, 2, 4.
B. Install four SFs in SF modules 1, 2, 3, 4.
C. Install five SFs in SF modules 1, 2, 3, 4, 5.
D. Install six SFs in SF modules 1, 2, 3, 4, 5, 6.
Answer: D

Avaya   certification 6102.1   certification 6102.1

Finalement, la Q&A Avaya 6102.1 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Avaya 6102.1 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Avaya, vous aurez un meilleur salaire et une plus grande space à se développer.

Les meilleures Avaya 6202.1 examen pratique questions et réponses

Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification Avaya 6202.1. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test Avaya 6202.1.

Dans n'importe quelle industrie, tout le monde espère une meilleure occasion de se promouvoir, surtout dans l'industrie de IT. Les professionnelles dans l'industrie IT ont envie d'une plus grande space de se développer. Le Certificat Avaya 6202.1 peut réaliser ce rêve. Et Pass4Test peut vous aider à réussir le test Avaya 6202.1.

Si vous traviallez dur encore pour préparer le test de Avaya 6202.1 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Avaya 6202.1.

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Avaya 6202.1, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

Code d'Examen: 6202.1
Nom d'Examen: Avaya (Avaya Aura(TM) Contact Center Implementation Exam)
Questions et réponses: 65 Q&As

La partie plus nouvelle de test Certification Avaya 6202.1 est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel Avaya 6202.1. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.

Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat Avaya 6202.1 est bien autorisé. Avec le certificat Avaya 6202.1, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A Avaya 6202.1.

6202.1 Démo gratuit à télécharger: http://www.pass4test.fr/6202.1.html

NO.1 A company is planning to implement a stand-alone Contact Center Manager Server (CCMS) license
with 50 Voice Agents Which license type should the company purchase?
A. Essential
B. Nodal NCC
C. Nodal Enterprise
D. Corporate Enterprise
Answer: A

Avaya examen   6202.1 examen   certification 6202.1   6202.1   certification 6202.1   6202.1

NO.2 You are preparing a Windows 2008 Server for Contact Center Manager Server (CCMS) and Server
Utility installation Which operation on the server can the Server Utility perform?
A. Perform event preferences
B. Perform database restores
C. Administer Contact Center Agent login credentials
D. Modify Real-Time Display interface parameters
Answer: A

Avaya   6202.1 examen   6202.1 examen   6202.1 examen

NO.3 You are installing Contact Center Manager Administration (CCMA) on a standalone server. Which
statement regarding passwords associated with CCMA running on a Windows Server 2008 operating
system is true?
A. The iceAdmin user account can be deleted during the CCMA installation
B. The iceAdmin user account password must be established during installation of CCMA
C. If the iceAdmin password is changed, CCMA cannot be logged on to either as webadmin of any other
user
D. If the default webadmin password is changed, CCMA cannot be logged on to either as iceAdmin or as
any other user
Answer: B

certification Avaya   certification 6202.1   6202.1 examen   6202.1

NO.4 Which pre-installation preparations must be completed on a Platform Vendor Independent (PVI) server
before installing Avaya Aura Contact Center server applications?
A. Enable IPV6 . Ensure SNMP is disabled. Enable NetBIOS. The ELAN card must be first in the binding
order
B. Enable IPV6. Ensure SNMP is enabled. Enable NetBIOS. The Contact Center Subnet (CLAN) card
must the first in the binding order
C. Disable IPV6. Ensure SNMP is enabled. Disable NetBIOS. The Contact Center Subnet (CLAN) card
must be first in the binding order
D. Disable IPV6. Ensure SNMP is enabled .Disable NetBIOS .The ELAN card must be first in the binding
order
Answer: C

certification Avaya   certification 6202.1   6202.1 examen   6202.1   6202.1 examen

NO.5 In a SIP based Avaya Aura Contact Center, the Contact Center Manager Server (CCMS) supports
secure Transport Layer Security (TLS) communication When implementing Security Certificate
management for TLS in the CCMS, what is the first step that must be accomplished?
A. Create the Certificate Store in the CCMS
B. Apply the Signed Certificate to the CCMS
C. Create a Certificate Signing Request (CSR) file from the CMS
D. Apply the Certificate Authority (CA) Root Certificate to the CCMS
Answer: D

Avaya   certification 6202.1   certification 6202.1   6202.1   6202.1

NO.6 Which operating system features should be enabled in Windows Server 2008 operating system before
you install Contact Center Manager Administration (CCMA)?
A. Windows Server Backup for running CCMA Server Backups and Internet Information Services (IIS)
B. TFTP Client to Backup of the CCMA configuration files to remote TFTP Server and XPS Viewer to view
reports on the server
C. Storage Manager for SAN s for managing the remote backups and IIS
D. IIS and XPS Viewer to view reports on the server
Answer: A

Avaya   6202.1   6202.1

NO.7 In an Avaya Aura Contact Center, what does enabling Open do?
A. It permits agents to utilize the Avaya OpenQueue Desktop for agent skills that have agents logged in
with the correct training and knowledge sets to handle calls
B. It allows third parties including Contact Center MultiMedia (CCMM) to create, read, and delete
multimedia and voice contacts in Contact Center Manager Server (CCMS)
C. It gives agents and Call Center supervisors the ability to manage multiple simultaneous contact types
such as voice, outbound voice, email, chat, IM and voicemail
D. It provides extended call queuring functionality for the Avaya Aura Contact Center by implementing
the same functionality as the Automatic Call Distribution Queue including useful features like visualization
Answer: B

Avaya examen   6202.1   certification 6202.1   certification 6202.1

NO.8 You have completed the stand-alone installation of Contact Center Manager Administration (CCMA)
software on a fully prepared Platform Vendor Independent (PVI) server The CCMA cannot establish a
connection to the Contact Center Manager Server (CCMS) What is one of the first steps to troubleshoot
the problem.?
A. Reinstall CCMA
B. Ensure that the correct sys-admin password is being used
C. Change the IP multicast sending address on the CCMS server
D. Ensure that the CCMS and CCMA servers have been added to a domain
Answer: B

certification Avaya   6202.1   certification 6202.1   6202.1 examen

Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test 6202.1 est lequel très important dans les tests de Certification Avaya. Pour être qualifié de Avaya, on doit obtenir le passport de test Avaya 6202.1.

Le matériel de formation de l'examen de meilleur Avaya 6006-1

Pass4Test possède une grande équipe composée des experts IT qui travaillent dur avec leurs riches expériences et connaissances pour produire un bon outil de formation. Selon les anciens test, le test simulation de Pass4Test est bien lié avec le test réel. Pass4Test peut vous assurer à réussir le test. Maintenant vous ajoutez votre outil de formation au panier, et votre rêve réalisera bien tôt.

Le test Certificat Avaya 6006-1 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Avaya 6006-1. Vous allez prendre toutes essences du test Avaya 6006-1 dans une courte terme.

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test Avaya 6006-1 à la première fois.

Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test Avaya 6006-1. Votre argent sera tout rendu si vous échouez le test.

Code d'Examen: 6006-1
Nom d'Examen: Avaya (Avaya Aura(TM) Communication Manager (R5.2.1) Implementation Exam)
Questions et réponses: 70 Q&As

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Avaya 6006-1 peut vous assurer à réussir 100% le test Avaya 6006-1. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Peut-être vous voyez les guides d'études similaires pour le test Avaya 6006-1, mais nous avons la confiance que vous allez nous choisir finalement grâce à notre gravité d'état dans cette industrie et notre profession. Pass4Test se contribue à amérioler votre carrière. Vous saurez que vous êtes bien préparé à passer le test Avaya 6006-1 lorsque vous choisissez la Q&A de Pass4Test. De plus, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

6006-1 Démo gratuit à télécharger: http://www.pass4test.fr/6006-1.html

NO.1 What are two ways of obtaining the RFA Module ID (MID) and System ID (SID)?
(Choose two.)
A. From the CM Linux prompt issue the command statuslicense-V .
B. From the CM SAT issue the command list configuration software-versions .
C. From the CM Linux prompt issue the command systat .
D. From the CM SAT issue the command display system-parameters customer-options .
Answer: A,D

Avaya   certification 6006-1   6006-1

NO.2 A Customer has 1200 IP phones in their solution and they are looking for redundancy
and load
balancing How many CLAN s are recommended for their IP phone registration and signaling?
A. 2
B. 3
C. 4
D. 5
Answer: B

certification Avaya   certification 6006-1   6006-1 examen   certification 6006-1

NO.3 At a new deployment the customer has a total of 2,000 subscribers at their main
location. They do not
need redundancy in their solution Which Media ServerMedia Gateway combination should be
used for
this deployment.?
A. S8800 Simplex with G450
B. S8800D with G450
C. S8300D with G430
D. S8800 Duplex with G650
Answer: A

certification Avaya   certification 6006-1   certification 6006-1   certification 6006-1

NO.4 Which two statements about the installing and cabling of the Media Gateway G650 are
true?(Choose
two.)
A. Mount the A carrier at the bother of the rack
B. Mount the A carnet in the uppermost position in the rack
C. In a multiple Media Gateway GB50 configuration, the G650s an be allocated in different
racks if long
TDMLAN cables are used to interconnect the 850s.
D. In a multiple Media Gateway G650 configuration put the G65s in the rack with no vertical
pace between
them.
Answer: A,D

certification Avaya   6006-1 examen   6006-1   6006-1 examen

NO.5 A customer users S8510 server with a Media Gateway he necessary components or
adding additional
DCP phones to the system, including a new G650. Which three tasks need to be performed
while
installing the additional requirement? (Choose three.)
A. Cable the two G650 carriers with a TDMLAN Bus Extender cable
B. Se the proper carrier address ID for the second G650 carrier
C. Add additional 2GB of RAM to the SB5 10 server.
D. Remove the right ITMLAN bus terminator from the bottom GB50 carrier and install the bus
terminator
at the left end of the TDWLAN bus on the G650 carrier directly above.
E. The new digital line card must be installed in slot 2 of the new G650.
Answer: A,B,D

Avaya examen   6006-1 examen   certification 6006-1   6006-1

NO.6 Which three settings need to be configured on a Layer 2 device? (Choose three.)
A. RIP
B. port speed
C. IP address
D. default gateway
F. routing interface
Answer: B,C,D

certification Avaya   certification 6006-1   6006-1 examen

NO.7 A customer asks that the current subnet mask assigned to a remote Avaya G450
Media Gateway
Primary Management interface (PM) be verified. Which two commands identity the
information requested?
(Choose two.)
A. show ip-info
B. show running-config
C. show interface vlan (vlan #)
D. show configuration media-gateway
E. show system
Answer: B,C

certification Avaya   6006-1   6006-1 examen   certification 6006-1

NO.8 The Avaya G450 Media Gateway can be configured to function as a DHCP (Dynamic
Host
Configuration Protocol) client DHCP client enable the G450 to receive an IP address from a
DHCP server,
according to the DHCP client-server protocol. As an option, the G-450 DHCP client can also
request to
receive which three types of IP-related information? (Choose three.)
A. a list all H 248 Media Gateways in the system
B. a Domain Name
C. a list of default routers
D. a list of all registered IP Phones
E. a list of available DNS servers
Answer: B,C,E

Avaya   6006-1   6006-1 examen   6006-1 examen   certification 6006-1   6006-1

Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification Avaya 6006-1, et aussi une meilleure assurance du succès du test 6006-1. Vous choisissez Pass4Test, vous choisissez le succès.

Le matériel de formation de l'examen de meilleur Microsoft 070-417

Participer au test Microsoft 070-417 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat Microsoft 070-417 symbole bien la professionnalité d'un travailleur dans cette industrie.

La Q&A Microsoft 070-417 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification Microsoft 070-417.

Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.

C'est pas facile à passer le test Certification Microsoft 070-417, choisir une bonne formation est le premier bas de réussir, donc choisir une bonne resource des informations de test Microsoft 070-417 est l'assurance du succès. Pass4Test est une assurance comme ça. Une fois que vous choisissez le test Microsoft 070-417, vous allez passer le test Microsoft 070-417 avec succès, de plus, un an de service en ligne après vendre est gratuit pour vous.

Le test Microsoft 070-417 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test Microsoft 070-417 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat Microsoft 070-417 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test Microsoft 070-417 avec l'aide de Pass4Test.

Code d'Examen: 070-417
Nom d'Examen: Microsoft (Upgrading Your Skills to MCSAWindows Server 2012)
Questions et réponses: 146 Q&As

Le test Microsoft 070-417 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Microsoft 070-417 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Microsoft 070-417.

070-417 Démo gratuit à télécharger: http://www.pass4test.fr/070-417.html

NO.1 Your network contains an Active Directory domain named contoso.com. The network
contains a server
named Server1 that runs Windows Server 2012 and a server named Server2 that runs Windows
Server
2008 R2 Service Pack 1 (SP1). Server1 and Server2 are member servers. You need to ensure that you
can manage Server2 from Server1 by using Server Manager.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. Install Windows Management Framework 3.0 on Server2.
B. Install Remote Server Administration Tools on Server1.
C. Install the Windows PowerShell 2.0 engine on Server1.
D. Install Microsoft .NET Framework 4 on Server2.
E. Install Remote Server Administration Tools on Server2.
Answer: AD

Microsoft examen   certification 070-417   070-417 examen   070-417 examen

NO.2 Your network contains an Active Directory domain named contoso.com. The domain contains
a server
named Server1 that runs Windows Server 2012. On a server named Server2, you perform a Server
Core
Installation of Windows Server 2012. You join Server2 to the contoso.com domain. You need to
ensure
that you can manage Server2 by using the Computer Management console on Server1.
What should you do on Server2.?
A. Run the Disable-NetFirewallRulecmdlet.
B. Run the Enable-NetFirewallRulecmdlet.
C. Run sconfig.exeand configure the network settings.
D. Run sconfig.exeand configure remote management.
Answer: B

certification Microsoft   certification 070-417   070-417 examen   070-417 examen

NO.3 Your network contains an Active Directory domain named contoso.com. All domain controllers
run
Windows Server 2008 R2. One of the domain controllers is named DC1. The network contains a
member
server named Server1 that runs Windows Server 2012. You need to promote Server1 to a domain
controller by using install from media (IFM).
What should you do first?
A. Create a system state backup of DC1.
B. Run the Active Directory Domain Services Installation Wizard on DC1.
C. Run the Active Directory Domain Services Configuration Wizard on Server1.
D. Create IFM media on DC1.
E. Upgrade DC1 to Windows Server 2012.
Answer: E

Microsoft examen   070-417 examen   certification 070-417   070-417 examen   certification 070-417   070-417 examen

NO.4 Your network contains an Active Directory domain named contoso.com. The domain contains
two
domain controllers named DC1 and DC2. You install Windows Server 2012 on a new computer
named
DC3. You need to manually configure DC3 as a domain controller.
Which tool should you use?
A. winrm.exe
B. Server Manager
C. dcpromo.exe
D. Active Directory Domains and Trusts
Answer: B

Microsoft examen   certification 070-417   070-417 examen

NO.5 You have a file server named Server1 that runs Windows Server 2012. Server1 has following
hardware
configurations: ¡è 16 GB of RA ¡è A single qu-core CP ¡è Three network teams that have two
network
adapters each You add additional CPUs and RAM t Server1. You repurpose Server1 as a
virtualization
host. You install the Hyper-V server role on Server1. You need to create four external virtual
switches in
Hyper-V.
Which cmdlet should you run first?
A. Add-VMNetworkAdapter
B. Add-NetLbfoTeamNic
C. Set-NetAdapter
D. Remove- NetLbfoTeam
Answer: D

certification Microsoft   certification 070-417   070-417 examen   certification 070-417

NO.6 You have a server named Server 1 that runs Windows Server 2012. Server1 has five network
adapters.
Three of the network adapters are connected to a network named LAN1. The two other network
adapters
are connected to a network named LAN2. You create a network adapter team named Team1 from
two of
the adapters connected to LAN1. You create a network adapter team named Team2 from the two
adapters connected to LAN2. A company policy states that all server IP addresses must be assigned
by
using a reserved address in DHCP. You need to identify how many DHCP reservations you must
create
for Server1.
How many reservations should you identify?
A. 2
B. 3
C. 5
D. 7
Answer: B

Microsoft examen   certification 070-417   certification 070-417   070-417 examen   070-417

NO.7 Your network contains an Active Directory domain named contoso.com. All servers run either
Windows
Server 2008 R2 or Windows Server 2012. All client computers run either Windows 7 or Windows 8.
The
domain contains a member server named Server1 that runs Windows Server 2012. Server1 has the
File
and Storage Services server role installed. On Server1, you create a share named Share1. You need
to
ensure that users can use Previous Versions to restore the files in Share1.
What should you configure on Server1?
A. A data recovery agent
B. The Shadow Copies settings
C. The Recycle Bin properties
D. A Windows Server Backup schedule
Answer: B

Microsoft   certification 070-417   certification 070-417

NO.8 Your network contains an Active Directory domain named contoso.com. The domain contains
two
domain controllers.
The domain controllers are configured as shown in the following table.
In the perimeter network, you install a new server named Server1 that runs Windows Server 2012.
Server1 is in a workgroup. You need to perform an offline domain join of Server1 to the
contoso.com
domain.
What should you do first?
A. Run the djoin.exe command.
B. Run the dsadd.exe command.
C. Transfer the PDC emulator role to DC1.
D. Transfer the infrastructure master role to DC1.
Answer: A

certification Microsoft   certification 070-417   070-417 examen   certification 070-417

Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A Microsoft 070-417 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de Microsoft 070-417 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.

Les meilleures Microsoft 70-516 examen pratique questions et réponses

Le test simulation Microsoft 70-516 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test Microsoft 70-516 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.

On doit faire un bon choix pour passer le test Microsoft 70-516. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification Microsoft 70-516 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.

Code d'Examen: 70-516
Nom d'Examen: Microsoft (TS: Accessing Data with Microsoft .NET Framework 4)
Questions et réponses: 196 Q&As

Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test Microsoft 70-516 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A Microsoft 70-516 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test Microsoft 70-516 plus facilement avec la Q&A de Pass4Test.

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Microsoft 70-516 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

Dépenser assez de temps et d'argent pour réussir le test Microsoft 70-516 ne peut pas vous assurer à passer le test Microsoft 70-516 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.

70-516 Démo gratuit à télécharger: http://www.pass4test.fr/70-516.html

NO.1 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database.
You use the ADO.NET Entity Framework to manage persistence-ignorant entities. You create an
ObjectContext instance named context.
Then, you directly modify properties on several entities. You need to save the modified entity values to the
database.
Which code segment should you use?
A. context.SaveChanges(SaveOptions.AcceptAllChangesAfterSave);
B. context.SaveChanges(SaveOptions.DetectChangesBeforeSave);
C. context.SaveChanges(SaveOptions.None);
D. context.SaveChanges();
Answer: B

Microsoft examen   70-516   70-516   70-516 examen

NO.2 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database and contains a LINQ to SQL data model.
The data model contains a function named createCustomer that calls a stored procedure.
The stored procedure is also named createCustomer. The createCustomer function has the following
signature.
createCustomer (Guid customerID, String customerName, String address1)
The application contains the following code segment. (Line numbers are included for reference only.)
01 CustomDataContext context = new CustomDataContext();
02 Guid userID = Guid.NewGuid();
03 String address1 = "1 Main Steet";
04 String name = "Marc";
05 ...
You need to use the createCustomer stored procedure to add a customer to the database.
Which code segment should you insert at line 05?
A. context.createCustomer(userID, customer1, address1);
B. context.ExecuteCommand("createCustomer", userID, customer1, address1);
Customer customer = new Customer() { ID = userID, Address1 = address1, Name = customer1, };
C. context.ExecuteCommand("createCustomer", customer);
Customer customer = new Customer() { ID = userID, Address1 = address1, Name = customer1, };
D. context.ExecuteQuery(typeof(Customer), "createCustomer", customer);
Answer: A

Microsoft examen   certification 70-516   certification 70-516   70-516   certification 70-516

NO.3 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
You use the ADO.NET Entity Framework to model entities. You write the following code segment. (Line
numbers are included for reference only.)
01 AdventureWorksEntities context = new
AdventureWorksEntities("http://localhost:1234/AdventureWorks.svc");
02 ...
03 var q = from c in context.Customers
04 where c.City == "London"
05 orderby c.CompanyName
06 select c;
You need to ensure that the application meets the following requirements:
Compares the current values of unmodified properties with values returned from the data source.
Marks the property as modified when the properties are not the same.
Which code segment should you insert at line 02?
A. context.MergeOption = MergeOption.AppendOnly;
B. context.MergeOption = MergeOption.PreserveChanges;
C. context.MergeOption = MergeOption.OverwriteChanges;
D. context.MergeOption = MergeOption.NoTracking;
Answer: B

certification Microsoft   certification 70-516   certification 70-516   70-516 examen

NO.4 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server 2008 database.
You use the ADO.NET Entity Framework to model your entities. You use ADO.NET self-tracking entities.
You need to ensure that the change-tracking information for the self-tracking entities can be used to
update the database.
Which ObjectContext method should you call after changes are made to the entities?
A. Attach
B. Refresh
C. SaveChanges
D. ApplyChanges
Answer: D

Microsoft examen   certification 70-516   certification 70-516   70-516   70-516 examen

NO.5 You use Microsoft Visual Studio 2010, Microsoft Sync Framework, and Microsoft .NET Framework 4.0
to create an application.
You have a ServerSyncProvider connected to a Microsoft SQL Server database. The database is hosted
on a Web server.
Users will use the Internet to access the Customer database through the ServerSyncProvider.
You write the following code segment. (Line numbers are included for reference only.)
01 SyncTable customerSyncTable = new SyncTable("Customer");
02 customerSyncTable.CreationOption = TableCreationOption.UploadExistingOrCreateNewTable;
03 ...
04 customerSyncTable.SyncGroup = customerSyncGroup;
05 this.Configuration.SyncTables.Add(customerSyncTable);
You need to ensure that the application meets the following requirements:
Users can modify data locally and receive changes from the server.
Only changed rows are transferred during synchronization.
Which code segment should you insert at line 03?
A. customerSyncTable.SyncDirection = SyncDirection.DownloadOnly;
B. customerSyncTable.SyncDirection = SyncDirection.Snapshot;
C. customerSyncTable.SyncDirection = SyncDirection.Bidirectional;
D. customerSyncTable.SyncDirection = SyncDirection.UploadOnly;
Answer: C

Microsoft examen   certification 70-516   70-516 examen   certification 70-516

NO.6 }
You need to ensure that the Product data for each Category object is lazy-loaded. What should you do?
A. Add the following code segment at line 06:
ctx.LoadProperty(category, "Products");
B. Add the following code segment at line 08:
ctx.LoadProperty(product, "*");
C. Add the following code segment at line 06:
var strPrdUri = string.Format("Categories({0})?$expand=Products", category.CategoryID);
var productUri = new Uri(strPrdUri, UriKind.Relative);
ctx.Execute<Product>(productUri);
D. Add the following code segment at line 08:
var strprdUri= string.format("Products?$filter=CategoryID eq {0}", category.CategoryID);
var prodcutUri = new Uri(strPrd, UriKind.Relative);
ctx.Execute<Product>(productUri);
Answer: A

Microsoft examen   70-516   certification 70-516
11.You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application connects to a Microsoft SQL Server database. You load records from the Customers table
into a DataSet object named dataset.
You need to retrieve the value of the City field from the first and last records in the Customers table.
Which code segment should you use?
A. DataTable dt = dataset.Tables["Customers"];
string first = dt.Rows[0]["City"].ToString();
string last = dt.Rows[dt.Rows.Count - 1]["City"].ToString();
B. DataTable dt = dataset.Tables["Customers"];
string first = dt.Rows[0]["City"].ToString();
string last = dt.Rows[dt.Rows.Count]["City"].ToString();
C. DataRelation relationFirst = dataset.Relations[0];
DataRelation relationLast = dataset.Relations[dataset.Relations.Count - 1];
string first = relationFirst.childTable.Columns["City"].ToString();
string last = relationLast.childTable.Columns["City"].ToString();
D. DataRelation relationFirst = dataset.Relations[0];
DataRelation relationLast = dataset.Relations[dataset.Relations.Count];
string first = relationFirst.childTable.Columns["City"].ToString();
string last = relationLast.childTable.Columns["City"].ToString();
Answer: A

Microsoft examen   70-516   70-516 examen   70-516 examen   70-516

NO.7 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
You use the ADO.NET Entity Framework to model entities. You write the following code segment. (Line
numbers are included for reference only.)
01 public partial class SalesOrderDetail : EntityObject
02 {
03 partial void OnOrderQtyChanging(short value)
04 {
05 ...
06 {
07 ...
08 }
09 }
10 }
You need to find out whether the object has a valid ObjectStateEntry instance. Which code segment
should you insert at line 05?
A. if (this.EntityState != EntityState.Detached)
B. if (this.EntityState != EntityState.Unchanged)
C. if (this.EntityState != EntityState.Modified)
D. if (this.EntityState != EntityState.Added)
Answer: D

certification Microsoft   certification 70-516   certification 70-516   70-516 examen

NO.8 You use Microsoft Visual Studio 2010 and Microsoft .NET Framework 4.0 to create an application.
The application uses the ADO.NET Entity Framework to model entities.
You define a Category class by writing the following code segment. (Line numbers are included for
reference only.)
01 public class Category
02 {
03 public int CategoryID { get; set; }
04 public string CategoryName { get; set; }
05 public string Description { get; set; }
06 public byte[] Picture { get; set; }
07 ...
08 }
You need to add a collection named Products to the Category class. You also need to ensure that the
collection supports deferred loading.
Which code segment should you insert at line 07?
A. public static List <Product> Products { get; set; }
B. public virtual List <Product> Products { get; set; }
C. public abstract List <Product> Products { get; set; }
D. protected List <Product> Products { get; set; }
Answer: B

certification Microsoft   70-516 examen   70-516 examen   70-516 examen

Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Microsoft 70-516 très tôt. Pass4Test peut vous permettre à réussir 100% le test Microsoft 70-516, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.

Dernières Microsoft 070-246 de la pratique de l'examen questions et réponses téléchargement gratuit

Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Microsoft 070-246. Le guide d'étude de Pass4Test comprend les excercices de Microsoft 070-246 et la Q&A qui peut vous permetrre à réussir 100% le test Microsoft 070-246. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.

Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test Microsoft 070-246 sans aucune doute si vous choisissez le Pass4Test.

Après une longue attente, les documentations de test Microsoft 070-246 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test Microsoft 070-246 à la première fois.

Code d'Examen: 070-246
Nom d'Examen: Microsoft (Monitoring and Operating a Private Cloud with System Center 2012)
Questions et réponses: 116 Q&As

Vous pouvez s'exercer en Internet avec le démo gratuit. Vous allez découvrir que la Q&A de Pass4Test est laquelle le plus complète. C'est ce que vous voulez.

Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Microsoft 070-246, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.

070-246 Démo gratuit à télécharger: http://www.pass4test.fr/070-246.html

NO.1 Your company has a private cloud that is managed by using a System Center 2012 infrastructure. You
deploy Data Protection Manager (DPM) to a server named DPMI. A server named Server1 has the
Hyper-V server role installed and hosts a virtual machine named VM1. From DPMI, you perform a full
backup of Server1. You discover that you are unable to restore individual files from VM1. You need to
ensure that you can restore individual files from VM1 by using the DPM Administrator console.
What should you do first?
A. On VM1, install Windows Server Backup.
B. On DPMI, attach the VHD of VM1.
C. On DPMI, install the Hyper-V server role.
D. On VM1, install the integration features.
Answer: A

Microsoft examen   certification 070-246   070-246 examen   070-246

NO.2 Your company has a private cloud that is managed by using a System Center 2012 infrastructure. The
infrastructure contains multiple servers that have Data Protection Manager (DPM) installed. A DPM server
named Server1 is running out of hard disk space. You add additional physical hard disks to Server1. You
verify that the additional disks are available from the local Disk Management console. You need to ensure
that the additional disk space can be used to store DPM backups. What should you do?
A. From the DPM Administrator console, click Refresh.
B. From the DPM Administrator console, click Disk Allocation.
C. From the DPM Administrator console, click Add.
D. From the DPM Administrator console, click Rescan.
Answer: C

Microsoft examen   070-246 examen   certification 070-246   certification 070-246   070-246   certification 070-246

NO.3 Your company has a private cloud that is managed by using a System Center 2012 Virtual Machine
Manager (VMM) infrastructure. You create a host group named HostGroup1. You move several Hyper-V
hosts to HostGroup1. You plan to manage Windows updates for the hosts in HostGroup1 by using VMM.
An administrator creates a baseline as shown in the exhibit. (Click the Exhibit button.)
You discover that the updates defined in the baseline are not applied to the hosts in HostGroup1. You
need to ensure that the required updates are deployed to the hosts in HostGroup1. What should you do?
A. Copy the required updates to the VMM library server.
B. Synchronize the Windows Server Update Services (WSUS) server.
C. Modify the properties of HostGroup1.
D. Modify the properties of the baseline.
Answer: A

Microsoft   070-246 examen   070-246 examen

NO.4 Your company has a private cloud that is managed by using a System Center 2012 infrastructure. The
network contains 50 virtual machines that run Windows 7. Each virtual machine has an application named
Appl.exe installed. A new version of Appl.exe is released. You need to identify which virtual machines
have the outdated version ofAppl.exe installed. What should you do?
A. From Operations Manager, create a monitor.
B. From Configuration Manager, deploy a Desired Configuration Management baseline.
C. From Service Manager, create a Virtual Machine Manager (VMM) connector.
D. From Virtual Machine Manager (VMM), deploy a service teMP1ate.
Answer: B

certification Microsoft   certification 070-246   070-246   certification 070-246

NO.5 Your company has a private cloud that is managed by using a System Center 2012 infrastructure. The
Service Manager management server is installed on a server named Server1. The Configuration
Manager site server is installed on a server named Server2. You create a baseline and several
configuration items. You need to configure Service Manager to create incidents for each Service Manager
configuration item that is non-coMP1iant with the baseline. What should you create?
A. a task and a Desired Configuration Management Event Workflow
B. a channel and a subscription
C. a connector and a Desired Configuration Management Event Workflow
D. a subscription, a connector, and a task
Answer: C

certification Microsoft   certification 070-246   certification 070-246   certification 070-246   070-246 examen

Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat Microsoft 070-246 est bien autorisé. Avec le certificat Microsoft 070-246, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A Microsoft 070-246.

Guide de formation plus récente de Microsoft 070-515

Selon les anciens test Microsoft 070-515, la Q&A offerte par Pass4Test est bien liée avec le test réel.

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Microsoft 070-515 peut vous assurer à réussir 100% le test Microsoft 070-515. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Pour réussir le test Microsoft 070-515 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Microsoft 070-515. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Microsoft 070-515 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.

Code d'Examen: 070-515
Nom d'Examen: Microsoft (TS: Web Applications Development with Microsoft .NET Framework 4)
Questions et réponses: 186 Q&As

Est-que vous s'inquiétez encore à passer le test Certification 070-515 qui demande beaucoup d'efforts? Est-que vous travaillez nuit et jour juste pour préparer le test de Microsoft 070-515? Si vous voulez réussir le test Microsoft 070-515 plus facilement? N'hésitez plus à nous choisir. Pass4Test vous aidera à réaliser votre rêve.

070-515 Démo gratuit à télécharger: http://www.pass4test.fr/070-515.html

NO.1 You have created an ASP.NET server control named Shopping Cart for use by other developers. Some
developers report that the Shopping Cart control does not function properly with ViewState disabled. You
want to ensure that all instances of the Shopping Cart control work even if View State is disabled.
What should you do.?
A. Require developers to set EnableViewStateMac to true.
B. Store state in ControlState instead of ViewState.
C. Serialize the state into an Application state entry called "MyControl".
D. Require developers to change the session state mode to SQLServer.
Answer: B

certification Microsoft   certification 070-515   certification 070-515

NO.2 You are troubleshooting an ASP.NET Web application. System administrators have recently expanded
your web farm from one to two servers. Users are periodically reporting an error message about invalid
view state. You need to fix the problem.
What should you do?
A. Set viewStateEncryptionMode to Auto in web.config on both servers.
B. Set the machineKey in machine.config to the same value on both servers.
C. Change the session state mode to SQLServer on both servers and ensure both servers use the same
connection string.
D. Override the SavePageStateToPersistenceMedium and LoadPageStateFromPersistenceMedium
methods in the page base class to serialize the view state to a local web server file.
Answer: B

certification Microsoft   070-515   070-515

NO.3 You are implementing an ASP.NET Web site that will be accessed by an international audience. The site
contains global and local resources for display elements that must be translated into the language that is
selected by the user. You need to ensure that the Label control named lblCompany displays text in the
users selected language from the global resource file. Which control markup should you use?
A. <asp:Label ID="lblCompany" runat="server"
meta:resourcekey="lblCompany" />
B. <asp:Label ID="lblCompany" runat="server"
Text="meta:lblCompany.Text" />
C. <asp:Label ID="lblCompany" runat="server"
Text="<%$ Resources:lblCompanyText %>" />
D. <asp:Label ID="lblCompany" runat="server"
Text="<%$ Resources:WebResources, lblCompanyText %>" />
Answer: D

Microsoft   certification 070-515   certification 070-515   certification 070-515   070-515 examen

NO.4 You are creating an ASP.NET Web site. The site has a master page named Custom.master. The
code-behind file for Custom.master contains the following code segment.
Partial Public Class Custom
Inherits System.Web.UI.MasterPage
Public Property Region As String
Protected Sub Page_Load(ByVal sender As Object,
ByVal e As System.EventArgs) Handles Me.Load
End Sub
End Class
You create a new ASP.NET page and specify Custom.master as its master page.
You add a Label control named lblRegion to the new page.
You need to display the value of the master pages Region property in lblRegion.
What should you do?
A. Add the following code segment to the Page_Load method of the page code-behind file.
Dim custom As Custom = Me.Parent
lblRegion.Text = custom.Region
B. Add the following code segment to the Page_Load method of the page code-behind file.
Dim custom As Custom = Me.Master
lblRegion.Text = custom.Region
C. Add the following code segment to the Page_Load method of the Custom.Master.vb code-behind file.
Dim lblRegion As Label = Page.FindControl("lblRegion")
lblRegion.Text = Me.Region
D. Add the following code segment to the Page_Load method of the Custom.Master.vb code-behind file.
Dim lblRegion As Label = Master.FindControl("lblRegion")
lblRegion.Text = Me.Region
Answer: B

Microsoft examen   070-515 examen   certification 070-515

NO.5 You are implementing an ASP.NET MVC 2 application. In the Areas folder, you add a subfolder named
Product to create a single project areA.
You add files named ProductController.vb and Index.aspx to the appropriate subfolders.
You then add a file named Route.vb to the Product folder that contains the following code. (Line numbers
are included for reference only.)
01 Public Class Route
Inherits AreaRegistration
02
03 Public Overrides ReadOnly Property AreaName As String
04 Get
05 Return "product"
06 End Get
07 End Property
08
09 Public Overrides Sub RegisterArea(
ByVal context As AreaRegistrationContext)
10
11 context.MapRoute("product_default",
"product/{controller}/{action}/{id}",
New With {.controller = "Product", .action = "Index",
.id = ""})
12
13 End Sub
End Class
When you load the URL http://<applicationname>/product, you discover that the correct page is not
returned.
You need to ensure that the correct page is returned.
What should you do?
A. Replace line 11 with the following code segment.
context.MapRoute("product_default",
"{area}/{controller}/{action}/{id}",
New With {.area = "product", .controller = "Product",
.action = "Index", .id = ""})
B. Replace line 11 with the following code segment.
context.MapRoute("product_default",
"{area}",
New With {.controller = "Product", .action = "Index", .id = ""})
C. Add the following code segment at line 12.
AreaRegistration.RegisterAllAreas()
D. Add the following code segment to the RegisterRoutes method in the Global.asax.vb file.
AreaRegistration.RegisterAllAreas()
Answer: A

Microsoft examen   certification 070-515   070-515   070-515 examen

NO.6 You create a new ASP.NET MVC 2 Web application. The following default routes are created in the
Global.asax.vb file. (Line numbers are included for reference only.)
01 Shared Sub RegisterRoutes(ByVal routes As RouteCollection)
02
03 routes.IgnoreRoute("{resource}.axd/{*pathInfo}")
04
05 routes.MapRoute(
"Default",
"{controller}/{action}/{id}",
New With {.controller = "Home", .action = "Index", .id = ""}
)
06 End Sub
You implement a controller named HomeController that includes methods with the following signatures.
Function Index() As ActionResult
Function Details(ByVal id As Integer) As ActionResult
Function DetailsByUsername(
ByVal username As String) As ActionResult
You need to add a route to meet the following requirements.
The details for a user must be displayed when a user name is entered as the path by invoking the
DetailsByUsername action.
User names can contain alphanumeric characters and underscores, and can be between 3 and 20
characters long.
What should you do?
A. Replace line 05 with the following code segment.
routes.MapRoute(
"Default",
"{controller}/{action}/{id}",
New With {.controller = "Home", .action = "DetailsByUsername",
.id = ""}
)
B. Replace line 05 with the following code segment.
routes.MapRoute(
"Default",
"{controller}/{action}/{username}",
New With {.controller = "Home", .action = "DetailsByUsername",
.username = ""},
New With {.username = "\w{3,20}"}
)
C. At line 04, add the following code segment.
routes.MapRoute(
"Details by Username",
"{username}",
New With {.controller = "Home", .action = "DetailsByUsername"},
New With {.username = "\w{3,20}"}
)
D. At line 04, add the following code segment.
routes.MapRoute(
"Details by Username",
"{id}",
New With {.controller = "Home", .action = "DetailsByUsername"},
New With {.id = "\w{3,20}"}
)
Answer: C

certification Microsoft   070-515 examen   070-515 examen   070-515 examen

NO.7 You are implementing an ASP.NET application that includes a page named TestPage.aspx.
TestPage.aspx uses a master page named TestMaster.master.
You add the following code to the TestPage.aspx code-behind file to read a TestMaster.master public
property named CityName.
Protected Sub Page_Load(ByVal sender As Object,
ByVal e As System.EventArgs) Handles Me.Load
Dim s As String = Master.CityName
End Sub
You need to ensure that TestPage.aspx can access the CityName property. What should you do?
A. Add the following directive to TestPage.aspx.
<%@ MasterType VirtualPath="~/TestMaster.master" %>
B. Add the following directive to TestPage.aspx.
<%@ PreviousPageType VirtualPath="~/TestMaster.master" %>
C. Set the Strict attribute in the @ Master directive of the TestMaster.master page to true.
D. Set the Explicit attribute in the @ Master directive of the TestMaster.master page to true.
Answer: A

Microsoft   certification 070-515   070-515 examen   070-515

NO.8 You are developing an ASP.NET Web page that contains input controls, validation controls, and a button
named btnSubmit.
The page has the following code-behind. (Line numbers are included for reference only.)
01 Public Class _Default
02 Inherits System.Web.UI.Page
03
04 Protected Sub SaveToDatabase()
05
06 End Sub
07
08 Protected Sub btnSubmit_Click(ByVal sender As Object,
09 ByVal e As EventArgs) Handles btnSubmit.Click
10
11 End Sub
12
13 End Class
You need to ensure that all data that is submitted passes validation before the data is saved in a
database.
What should you do?
A. Add the following method override.
Protected Overrides Sub OnInit(ByVal e As EventArgs)
MyBase.OnInit(e)
If (Page.IsValid) Then Me.SaveToDatabase()
End Sub
B. Add the following method override.
Protected Overrides Sub OnLoad(ByVal e As EventArgs)
MyBase.OnLoad(e)
If (Page.IsValid) Then Me.SaveToDatabase()
End Sub
C. Add the following method override.
Protected Overrides Sub OnPreRender(ByVal e As EventArgs)
MyBase.OnPreRender(e)
If (Page.IsValid) Then Me.SaveToDatabase()
End Sub
D. Add the following code segment at line 10.
If (Page.IsValid) Then Me.SaveToDatabase()
Answer: D

certification Microsoft   070-515 examen   certification 070-515

En quelques années, le test de certification de Microsoft 070-515 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Microsoft 070-515? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification 070-515. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification 070-515, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.